NewAir AW-210ED instruction manual Troubleshooting, Problem Possible Causes

Page 5

Troubleshooting

To troubleshoot your wine cooler, follow the suggestions below to address the most common problems before seeking assistance from a service center:

PROBLEM

POSSIBLE CAUSES

The wine cooler will not operate.

• The unit may be plugged in using a different voltage.

 

Also, the circuit breaker may be tripped or there is a

 

blown fuse.

The wine cooler is not cold

• Check the temperature control settings, as the external

enough.

environment may require a higher setting.

 

• The door may be opened too frequently.

 

• The door is not closed completely.

 

• The door seal does not seal properly.

 

• The wine cooler does not have sufficient clearance.

The light does not work.

• Contact the dealer or an authorized service center.

The wine cooler vibrates while

• Make sure the unit is leveled.

operating.

 

The wine cooler produces a lot of

• The unit may not be leveled.

noise.

• Check the fan.

The door will not close properly.

• The unit is not leveled.

 

• The doors are reversed and not properly installed.

 

• The seal is weak.

 

• The shelves are out of position.

 

 

The LED display does not work.

• There may be a problem with the main control board.

 

• There is a PCB problem.

 

• There is a problem with the plug.

There is an LED display error.

• The display may be weak.

 

• The temperature point is off.

The buttons do not function.

• The temperature control panel may be damaged.

Image 5
Contents Thermoelectric Wine Cooler Important Safety Instructions Product DiagramElectrical Connection Installation InstructionsOperating Your Wine Cooler Care and MaintenanceProblem Possible Causes Troubleshooting