WhisperKool PT-EXPL, 8000ti, 4000 Control Panel Features and Operation, Button Normal Functions

Page 27

CONTROL PANEL FEATURES AND OPERATION

Button

Normal Functions

ON/OFF

• The ON/OFF button allows the customer the convenience of turning the refrigeration system

 

ON or OFF, from the control panel. This feature does not disconnect power from the unit, and

 

the condenser fan will continue to run in the OFF position. In order for the power to be shut off

 

from the unit, the power cord must be unplugged from the wall receptacle.

 

• Press the ON/OFF button once for button application.

Up and

• Use these buttons to scroll up or down the CPSM menu.

Down

• Displays the Highest and Lowest temperature sensed by the Bottle Probe. This feature allows

Arrows

the customer instant access to the recorded data applicable to the Bottle Probe Temperatures,

 

it can be easily reset to reflect current temperatures.

 

1. Press the “UP” arrow, or the “Down” arrow once, and the Highest or Lowest Temperature (Hi/Lo)

 

sensed by the Bottle Probe, will be displayed.

 

2. To reset the Hi/Lo, press and hold the “Set” button when the Hi/Lo value is displayed on the

 

Digital Display, continue to hold the “Set” button until “rst” appears on the digital display and then

 

blinks. This will erase the past recorded “Temperature Data History” and start recording, from the

 

current time and temperature, forward. Temperatures displayed would reflect Bottle Probe Tem-

 

peratures from that point in time, and beyond.

 

3. The Hi/Lo feature should be reset at initial “Start-Up” and after the Cellar or Cabinet has obtained

 

normal operating temperatures, which is generally 55°F.

Cellar

The CPC Feature is activated by pressing the Up button for 3-5 seconds, and the CPC logo will be

PreChill

displayed on the digital display. The CPC feature can be terminated by pressing the Up button for

(CPC)

3-5 seconds, or the feature will self terminate after 6 hrs.

 

1. The (CPC) Feature may be used to Pre-Chill the Cellar prior to loading it with Warm Product. The

 

feature will shift the Set Point down to a lower setting of 52°F, for the next 6 hours. After the 6 hour

 

time period, the Set Point will automatically return to the original Set Point.

 

2. The CPC feature can be conveniently adjusted to the customer’s specific needs, by accessing the

 

“Customer Preference Select Mode” (CPSM). See Customer Preference Select Mode Instructions.

 

Note: This feature is not available on the Remote Key Pad application.

Page 27

Page 26 Page 28
Image 27
Page 26 Page 28
Contents Platinum 8000ti PT-EXPL Table of Contents Controller Whisperkool Series Quick Reference GuideFAN Speed Reference Controller Quick Reference GuideModel 4000 8000 8000ti IntroductionReceiving & Inspecting the Unit Customer Warranty RegistrationReview the Packing Slip to Verify Contents Check the Accessory Kits for the following contentsVapor Barrier Preparing the Wine CellarWall & Ceiling Framing InsulationMounting the Unit Unobstructed AirflowDoor and Door Seal Exhaust Fan Ambient Temperature FactorHow to Build a Wine Cellar Instructional Video VentilationCutting the Hole for the WhisperKOOL Unit Sizing the Unit to the RoomPT-EXPL Electrical Outlet InstallationTest the Unit Prior to Installation Electrical NeedsMounting Flange Pieces THROUGH-THE-WALL Installation without ductworkPlacement of Unit Location of Supply and Return GrillesDo not Condensation Drain Line Tube Exterior Grille Installation Installation OptionsDucted Installation Cold Air to/from Wine CellarWarm Air to/from Wine Cellar Ducted Installation Condenser Exhaust Cold Air Return Air Intake Wine Cellar Standard Ducted InstallationDual Outlet Duct Attic Mounted SystemReturn Air-Cellar Side Outside through the WallWine Cellar Adjacent Room Wine Cellar SideCellarRemote Controller Installation and Configuration Connection wire in Side Mount configuration To Use the thermostat Liquid Measuring Thermostat SystemOnly on the 8000ti Variable Speed ControlSystem Operation Standard & Remote Button Normal Functions Control Panel Features and OperationCpsm Alarm Codes Wash with warm water Maintenance ScheduleRemove grille/ducting on both ends of unit Remove the filter covering the coilUnit does not run/power up Possible Cause Solution Cellar Temperature is to Too Cold Possible Cause SolutionUnit leaks water Possible Cause Solution Humidity in cellar too low Solution Possible Cause Unit runs but does not cool Possible Cause SolutionPossible Cause Solution Compressor short cycles Possible Cause SolutionTechnical Assistance Contact WhisperKOOL Customer ServiceWhisperKOOL Extreme Cooling System Installation Terms and ConditionsPage WhisperKOOL 1738 E. Alpine Ave Stockton, CA Page WhisperKOOL

4000, 8000ti, 8000, EXTREME SERIES, PT-EXPL specifications

WhisperKool PT-EXPL Extreme Series represents the pinnacle of wine cellar cooling technology, designed specifically for serious wine collectors and enthusiasts. The series includes four exceptional models: PT-EXPL, 8000, 8000ti, and 4000. Each model is engineered to provide optimal cooling performance, ensuring that your wine is stored at the perfect temperature and humidity for preservation.

The PT-EXPL model is a standout with its advanced cooling technology. This unit features a self-contained design, making installation simple and efficient. It is capable of cooling wine cellars up to 1,200 cubic feet. The PT-EXPL is equipped with a digital thermostat, which allows users to set and maintain precise temperature levels, ensuring that wine is stored under ideal conditions. Additionally, its energy-efficient operation helps minimize utility costs while maximizing cooling performance.

The 8000 and 8000ti models provide even greater capabilities, catering to wine collectors with more extensive collections. The 8000 model is designed for cellars up to 1,500 cubic feet, while the 8000ti can handle spaces up to 2,000 cubic feet. Both models incorporate WhisperKool's patented airflow technology, which optimizes the circulation of cool air within the cellar, preventing hot spots that could adversely affect wine quality. The advanced electronic controls on these units feature multiple settings for temperature and humidity, giving wine enthusiasts even more control over the storage environment.

The 4000 model is engineered for smaller, yet equally significant wine collections, accommodating spaces up to 500 cubic feet. It combines high efficiency with sleek design, making it an ideal choice for both residential and commercial applications. Like its larger counterparts, the 4000 features reliable temperature and humidity control, ensuring that wine is kept in the best possible conditions.

All models in the WhisperKool Extreme Series come equipped with efficient compressors and sound-dampening technology, resulting in quiet operation that won't disturb the ambiance of your wine cellar. With a focus on durability, these units also feature insulated housing and robust construction to withstand the rigors of varied environments.

In summary, the WhisperKool PT-EXPL Extreme Series, including the 8000, 8000ti, and 4000 models, is designed for wine aficionados who prioritize optimal storage conditions. With advanced features, energy efficiency, and reliability, these systems are the perfect choice for preserving the integrity of your wine collection.
Top Page Image Contents