U-Line 29R, 1175BEV, 1175R Door Alignment Check and Adjustment, Door Reversal, Black Model 1115R

1

ULIN_0042_A

Figure 20

2.If the unit is not level, adjust the feet on the corners of the unit as necessary (Figure 20).

3.Check the levelness after each adjustment and repeat the previous steps until the unit is level.

Door Alignment Check and Adjustment

IMPORTANT

Properly aligned, the door’s gasket should be firmly in contact with the cabinet all the way around the door (no gaps). Carefully examine the door’s gasket to assure that it is firmly in contact with the cabinet. Also make sure the door gasket is not pinched on the hinge side of the door.

ULIN_0143_A

Figure 21

NOTE: Model 29R shown (Figure 21)

1.Loosen (do not remove) top (Figure 21) and bottom hinge screws.

2.Align door squarely with cabinet.

3.Make sure gasket is firmly in contact with cabinet all the way around the door (no gaps).

4.Tighten bottom hinge screws.

5.Tighten top hinge screws.

Door Reversal

Black or white unit doors may be left- or right-hand opening. Depending upon the location of the unit, it may be desirable to change the side on which the door is mounted.

Black Model 1115R

To reverse the door, perform the following:

1. Remove the grille and grille cap (two screws).

ULIN_0143_A

Figure 22

2.Remove top hinge from cabinet (three screws) (Figure 22). Hold door to keep it from falling.

3.Lift the door off the bottom hinge.

ULIN_0121_A

Figure 23

4.Remove bottom hinge from cabinet (two screws) (Figure 23).

16 1115R, 1175R, 29R, 1175BEV