U-Line 1175BEV, 29R Manual Temperature Control, Normal Operating Sounds, Adjusting Temperature

Page 9

Adjusting Temperature

IMPORTANT

Adjust the set point temperature in single increments, and wait 24 hours for the temperature to stabilize before rechecking.

1

2

3

4

5

 

 

 

ULIN_0074_A

Figure 7

To adjust the set point temperature:

1.Press and release either the WARMER (Figure 7, 4) or COOLER (Figure 7, 5) button to put the controller in the SET TEMPERATURE mode. The °F (or °C) symbol will begin to flash.

NOTE: If no further action is taken, this mode will self cancel in five seconds, and the original set-point temperature will be displayed.

2.Within five seconds (while the °F (or °C) symbol is flashing), press the WARMER or COOLER button as required to adjust the set point temperature.

3.The change will be set five seconds after adjusting the temperature, and the new set-point will be displayed (Figure 7, 3).

Many factors can affect the internal temperatures of the cabinet. They include:

•Temperature setting.

•Ambient temperature where installed.

•The number of times and length of time the door is opened and closed.

•The amount of time the internal light is illuminated. (This affects primarily product on top rack or shelf.)

•Installation in direct sunlight or near a heat source.

Manual Temperature Control

Model 29R

1

ULIN_0014_A

Figure 8

Adjust the temperature by turning the numbered dial (Figure 8, 1) in small increments. Turn knob clockwise to make unit colder and counterclockwise to make unit warmer. After adjusting temperature, allow 24 hours for unit to stabilize.

Many factors can affect the internal temperatures of the cabinet. They include:

•Temperature setting.

•Ambient temperature where installed.

•The number of times and length of time the door is opened and closed.

•The amount of time the internal light is illuminated. (This affects primarily product on top rack or shelf.)

•Installation in direct sunlight or near a heat source.

Normal Operating Sounds

All models incorporate rigid foam insulated cabinets to provide high thermal efficiency and maximum sound reduction for its internal working components. In spite of this technology, your model may make sounds that are unfamiliar.

Normal operating sounds may be more noticeable because of the unit’s environment. Hard surfaces such as cabinets, wood/vinyl/tiled floors and paneled walls have a tendency to reflect normal appliance operating noises.

Common refrigeration components, and a brief description of the normal operating sounds they make, are listed below. NOTE: Your product may not contain all of the components listed.

•Compressor: The compressor makes a hum or pulsing sound that may be heard when it operates.

•Evaporator: Refrigerant flowing through an evaporator may sound like boiling liquid.

•Condenser Fan: Air moving through a condenser may be heard.

•Automatic Defrost/Drain Pan: Water may be heard dripping or running into the drain pan when the unit is in the defrost cycle.

1115R, 1175R, 29R, 1175BEV

9

Page 8 Page 10
Image 9
Page 8 Page 10
Contents 29R 1175BEV 1115R1175R Use and Care GuideWarranty Registration Please Record Your Model InformationIntroduction Table of Contents Page Safety Alert Definitions General PrecautionsSafety Precautions Right Temperature for Wine Product FeaturesOrigins Refrigerator Models 1115R, 1175R, 29R Origins Beverage Center Model 1175BEVInitial Startup Interior LightingOperation Temperature Display Temperature Display SelectionChecking Product Temperature Electronic Control PanelManual Temperature Control Adjusting TemperatureNormal Operating Sounds Outdoor, Marine and RV Usage Wine Stocking RecommendationsStorage, Vacation, Moving Product DisposalWine Guide Wine RecommendationsWine Selections Suggestions Suggestions for Matching Food and WineCommon Tasting Terms Guide to Common Styles of WineRed Wines White WinesGeneral Cleaning MaintenanceCleaning and Maintenance Model 29R Condenser CleaningModel 1115R Interval Every Three MonthsModels 1175R and 1175BEV LevelingDoor Alignment Check and Adjustment Door ReversalBlack Model 1115R Invert Black or White Model 1175R To reverse the door, perform the following ULIN0122A Door Shelf Removal/Insertion Glass Shelf Removal/Installation Light Bulb Replacement1115R, 1175R and 1175BEV Wood Trim Finishing Wine Rack Removal/Installation1175BEV Do not remove the track side rails from the cabinetIf Service is Required Before Calling for ServiceReplacement Parts ServiceTroubleshooting What to check when problems occur Troubleshooting GuideTroubleshooting Models with an electronic display Task Touch Display Comment Electronic Control Quick GuidePage Page Page Line Corporation Limited Warranty For General Inquiries For Service and Parts Assistance

1115R, 1175R, 1175BEV, 29R specifications

U-Line has established itself as a prominent brand in the realm of premium refrigeration solutions, and its model lineup, including the 29R, 1175BEV, 1175R, and 1115R, exemplifies this commitment to excellence. Each of these models offers unique features designed to enhance the user experience, address diverse needs, and complement various home designs.

The U-Line 29R is a standout model known for its versatile ice-making capabilities. With a production rate of up to 28 pounds of clear ice daily, this unit ensures a steady supply for parties, gatherings, or everyday use. One of its primary features includes a self-closing door mechanism, which enhances efficiency by maintaining optimal temperatures. Additionally, the 29R is available in various finishes, allowing consumers to choose a design that seamlessly integrates with their existing appliances.

The U-Line 1175BEV, a premier beverage center, focuses on providing perfect chilling conditions for beverages. This model features dual-zone temperature control, allowing users to maintain different temperatures for various types of beverages, such as wines, beers, and sodas. With a capacity to hold several bottles and cans, the 1175BEV also incorporates an innovative glass door with Low-E coating, which minimizes UV exposure and temperature fluctuations, enhancing the preservation of the beverages inside.

For those seeking an undercounter refrigerator, the U-Line 1175R offers a spacious interior designed to fit a wide range of food and drink items. This model boasts a built-in ice maker, ensuring that users have quick access to ice without the need for additional appliances. Its quiet operation and energy-efficient design make it an ideal choice for modern kitchens, while adjustable shelving provides flexibility to accommodate diverse storage needs.

Completing the lineup is the U-Line 1115R, which is engineered for compact spaces without compromising functionality. This refrigerator features advanced cooling technology that maintains consistent temperatures and humidity levels, which is crucial for preserving the freshness of ingredients. The 1115R is also designed with a sleek, minimalist aesthetic in mind, making it suitable for any style of decor.

In summary, the U-Line models 29R, 1175BEV, 1175R, and 1115R represent the pinnacle of modern refrigeration technology. Each unit is meticulously designed with user-friendly features, customizable options, and energy-efficient operations, catering to aesthetic preferences and functional requirements alike. Whether it’s for ice production, beverage chilling, or food storage, U-Line’s range of high-quality appliances meets the demands of contemporary living spaces.
Top Page Image Contents