Before Calling for Service, If Service is Required

6.Remove all dust from the wood, and apply one coat of Minwax® Polycrylic® Protective Finish using a synthetic bristle brush to the wood. This finish should be applied in a thin coat following the direction of the grain.

Apply the finish to the back and sides of the wood first, and allow it to dry for two hours. Apply the finish to the front side of the wood next, and allow it to dry for two hours. Sand with very fine 220 grit sandpaper. Apply two addition coats of the finish in the same manner, but do not sand the trim after the final third coat is applied.

7.Allow the final coat to dry for 24 hours before reinstalling the trim to the cabinet interior components.

Final finish-only application:

1.Remove all screws securing wood trim to interior components, and remove the trim.

2.Lightly scruff sand the wood trim with 280 or finer grit sandpaper.

3.Remove sanding dust with a clean, dry cloth.

4.The factory-applied seal is compatible with virtually all finishes. A low odor, water clean up, quick-drying finish such as Minwax® Polycrylic® Protective Finish is recommended (Minwax® Polycrylic® is an ultra fast- drying water-based finish). Apply a thin coat of a clear, protective finish, following the container label directions.

5.Lightly sand and reapply if desired.

6.Allow the final coat to dry for 24 hours before reinstalling the trim to the cabinet interior components.

8 Service

Before Calling for Service

If your U-Line product appears to be malfunctioning, read through the OPERATION section of this guide to ensure that the function of all controls are clearly understood. If the malfunction persists, the TROUBLESHOOTING GUIDE in this guide will assist you in quickly identifying common problems, and provide information on possible causes and remedies. Most often, this will resolve the problem without the need to call for service.

If Service is Required

If you do not understand a troubleshooting remedy, or your product needs service, contact U-Line Corporation directly. Contact information appears on the rear cover of this guide.

You will be asked for your product Model and Serial Numbers. This information should be recorded inside the front cover of this guide, following the products original purchase. It also appears on the Model and Serial number plate located on the upper right or rear wall of the interior of your product.

Replacement Parts

When you need replacement parts, always request that genuine U-Line replacements be used. U-Line products have been designed and engineered using components that work efficiently, and provide superior service life and performance. The use of aftermarket parts or components may affect the safety, operation, performance or durability of your product, and may also void its warranty.

24	1115R, 1175R, 29R, 1175BEV

1115R, 1175R, 1175BEV, 29R specifications

U-Line has established itself as a prominent brand in the realm of premium refrigeration solutions, and its model lineup, including the 29R, 1175BEV, 1175R, and 1115R, exemplifies this commitment to excellence. Each of these models offers unique features designed to enhance the user experience, address diverse needs, and complement various home designs.

The U-Line 29R is a standout model known for its versatile ice-making capabilities. With a production rate of up to 28 pounds of clear ice daily, this unit ensures a steady supply for parties, gatherings, or everyday use. One of its primary features includes a self-closing door mechanism, which enhances efficiency by maintaining optimal temperatures. Additionally, the 29R is available in various finishes, allowing consumers to choose a design that seamlessly integrates with their existing appliances.

The U-Line 1175BEV, a premier beverage center, focuses on providing perfect chilling conditions for beverages. This model features dual-zone temperature control, allowing users to maintain different temperatures for various types of beverages, such as wines, beers, and sodas. With a capacity to hold several bottles and cans, the 1175BEV also incorporates an innovative glass door with Low-E coating, which minimizes UV exposure and temperature fluctuations, enhancing the preservation of the beverages inside.

For those seeking an undercounter refrigerator, the U-Line 1175R offers a spacious interior designed to fit a wide range of food and drink items. This model boasts a built-in ice maker, ensuring that users have quick access to ice without the need for additional appliances. Its quiet operation and energy-efficient design make it an ideal choice for modern kitchens, while adjustable shelving provides flexibility to accommodate diverse storage needs.

Completing the lineup is the U-Line 1115R, which is engineered for compact spaces without compromising functionality. This refrigerator features advanced cooling technology that maintains consistent temperatures and humidity levels, which is crucial for preserving the freshness of ingredients. The 1115R is also designed with a sleek, minimalist aesthetic in mind, making it suitable for any style of decor.

In summary, the U-Line models 29R, 1175BEV, 1175R, and 1115R represent the pinnacle of modern refrigeration technology. Each unit is meticulously designed with user-friendly features, customizable options, and energy-efficient operations, catering to aesthetic preferences and functional requirements alike. Whether it’s for ice production, beverage chilling, or food storage, U-Line’s range of high-quality appliances meets the demands of contemporary living spaces.