U-Line 29R Electronic Control Panel, Temperature Display Selection, Checking Product Temperature

Page 8

Electronic Control Panel

1

2

3

4

5

 

 

 

ULIN_0074_A

Figure 5

Models 1115R, 1175R and 1175BEV

The electronic control with digital display (Figure 5) is configured to show a single temperature continuously. This set-point temperature is a base number used by the controller to maintain the temperature zone in your unit. The factory default set-point is 38°F. This set-point temperature is used as a gauge if further temperature adjustments are required.

Model 1175BEV has a DISPLAY OFF mode available through the control panel. This mode allows you to control whether the display (Figure 5, 3) will be ON or OFF whenever the door is closed. The button sequence that follows will switch between both modes:

1.Press and hold the WARMER button (Figure 5, 4), and simultaneously within five seconds press the ON/OFF button (Figure 5, 2) three times.

2.The display will be either visible or dark when the door is closed.

3.To return to the previous mode, repeat Step 1.

Temperature Display Selection

U-Line products supplied for 110 VAC operation have temperatures displayed in a default Fahrenheit (°F) configuration (Figure 5, 3). Models supplied for 220 VAC operation have temperatures displayed in a default Celsius (°C) configuration.

The display can easily be adjusted for either type of temperature display. Press and hold the LIGHT button (Figure 5, 1) and simultaneously within five seconds press the COOLER button (Figure 5, 5) three times to change the display as desired.

Temperature Display

To display actual temperature:

1.Press the WARMER button (Figure 5, 4) for five seconds. The display (Figure 5, 3) will indicate the actual temperature.

2.After approximately 10 seconds, the set point temperature will return to the display.

Checking Product Temperature

ULIN_0093_A

Figure 6

IMPORTANT

U-Line recommends a set temperature of 38°F on all refrigerators.

To check the actual product temperature in your unit, insert an accurate thermometer into a plastic (non- breakable) bottle that is partially filled with water. Tighten the bottle cap securely (Figure 6).

Place the bottle in the desired area for 24 hours. Refrain from opening the unit during the testing period. After 24 hours, check the temperature of the water. If required, adjust the temperature control in a small increment (See

ADJUSTING TEMPERATURE).

Factors which affect the internal temperatures of the cabinet include:

•Temperature setting.

•Ambient temperature where installed.

•The number of times and length of time a door is opened and closed.

•The amount of time the internal light is illuminated. (This affects primarily product on top rack or shelf.)

•Installation in direct sunlight or near a heat source.

8

1115R, 1175R, 29R, 1175BEV

Page 7 Page 9
Image 8
Page 7 Page 9
Contents Use and Care Guide 29R 1175BEV 1115R1175RIntroduction Warranty RegistrationPlease Record Your Model Information Table of Contents Page Safety Precautions Safety Alert DefinitionsGeneral Precautions Product Features Right Temperature for WineOrigins Refrigerator Models 1115R, 1175R, 29R Origins Beverage Center Model 1175BEVOperation Initial StartupInterior Lighting Temperature Display Selection Temperature DisplayChecking Product Temperature Electronic Control PanelNormal Operating Sounds Manual Temperature ControlAdjusting Temperature Wine Stocking Recommendations Outdoor, Marine and RV UsageStorage, Vacation, Moving Product DisposalWine Recommendations Wine GuideWine Selections Suggestions Suggestions for Matching Food and WineGuide to Common Styles of Wine Common Tasting TermsRed Wines White WinesCleaning and Maintenance General CleaningMaintenance Condenser Cleaning Model 29RModel 1115R Interval Every Three MonthsLeveling Models 1175R and 1175BEVBlack Model 1115R Door Alignment Check and AdjustmentDoor Reversal Invert Black or White Model 1175R To reverse the door, perform the following ULIN0122A Door Shelf Removal/Insertion 1115R, 1175R and 1175BEV Glass Shelf Removal/InstallationLight Bulb Replacement Wine Rack Removal/Installation Wood Trim Finishing1175BEV Do not remove the track side rails from the cabinetBefore Calling for Service If Service is RequiredReplacement Parts ServiceTroubleshooting Guide Troubleshooting What to check when problems occurTroubleshooting Models with an electronic display Electronic Control Quick Guide Task Touch Display CommentPage Page Page Line Corporation Limited Warranty For General Inquiries For Service and Parts Assistance

1115R, 1175R, 1175BEV, 29R specifications

U-Line has established itself as a prominent brand in the realm of premium refrigeration solutions, and its model lineup, including the 29R, 1175BEV, 1175R, and 1115R, exemplifies this commitment to excellence. Each of these models offers unique features designed to enhance the user experience, address diverse needs, and complement various home designs.

The U-Line 29R is a standout model known for its versatile ice-making capabilities. With a production rate of up to 28 pounds of clear ice daily, this unit ensures a steady supply for parties, gatherings, or everyday use. One of its primary features includes a self-closing door mechanism, which enhances efficiency by maintaining optimal temperatures. Additionally, the 29R is available in various finishes, allowing consumers to choose a design that seamlessly integrates with their existing appliances.

The U-Line 1175BEV, a premier beverage center, focuses on providing perfect chilling conditions for beverages. This model features dual-zone temperature control, allowing users to maintain different temperatures for various types of beverages, such as wines, beers, and sodas. With a capacity to hold several bottles and cans, the 1175BEV also incorporates an innovative glass door with Low-E coating, which minimizes UV exposure and temperature fluctuations, enhancing the preservation of the beverages inside.

For those seeking an undercounter refrigerator, the U-Line 1175R offers a spacious interior designed to fit a wide range of food and drink items. This model boasts a built-in ice maker, ensuring that users have quick access to ice without the need for additional appliances. Its quiet operation and energy-efficient design make it an ideal choice for modern kitchens, while adjustable shelving provides flexibility to accommodate diverse storage needs.

Completing the lineup is the U-Line 1115R, which is engineered for compact spaces without compromising functionality. This refrigerator features advanced cooling technology that maintains consistent temperatures and humidity levels, which is crucial for preserving the freshness of ingredients. The 1115R is also designed with a sleek, minimalist aesthetic in mind, making it suitable for any style of decor.

In summary, the U-Line models 29R, 1175BEV, 1175R, and 1115R represent the pinnacle of modern refrigeration technology. Each unit is meticulously designed with user-friendly features, customizable options, and energy-efficient operations, catering to aesthetic preferences and functional requirements alike. Whether it’s for ice production, beverage chilling, or food storage, U-Line’s range of high-quality appliances meets the demands of contemporary living spaces.
Top Page Image Contents