5.Remove the two door closer inserts (Figure 23, 1) from the existing bottom hinge and install as shown on the new bottom hinge (Figure 22, 1).
6.Remove existing bottom hinge (three screws) and remount on opposite side TOP. Remove hinge screw pin.
7.Remove the plastic hole plug from the top of the door to allow the pivot pin to be inserted in the new location. Install the plug into the vacated hole on the opposite side.
ULIN_0006_A |
Figure 24
8.With bottom of door facing up, remove pivot plate (two screws), flip over, and remount on opposite side of door (Figure 24). Be sure notch in plate faces center.
9.Holding door upright with top of door tilted forward, place hole of door pivot plate on bottom hinge screw pin/closer inserts (Figure 22, 1).
10.Tilt top of door into position in top hinge and install top hinge screw pin.
11.Install plastic screw plugs removed in Step 2 in old hinge holes (three each, top and bottom).
Door Shelf Removal/Insertion
1
2
ULIN_0039_A
Figure 25
To remove the door shelf:
1.Grasp shelf in center, lift slightly, and tilt
2.Carefully pull shelf off bosses (Figure 25, 2).
To install the door shelf:
1.Holding shelf in center, align notches (Figure 25, 1) in shelf with bosses (Figure 25, 2) in door.
2.Tilt shelf at a
16 | CO2175FF, 2175RF |