U-Line CLRCO2175, CLR2160 manual Troubleshooting Guide, Electrocution Hazard

Page 24

Troubleshooting Guide

NOTE: Recommended refrigerator temperature setting is

DANGER38°F.

ELECTROCUTION HAZARD

Never attempt to repair or perform maintenance on the unit until the main electrical power has been disconnected.

Troubleshooting - What to check when problems occur:

PROBLEM

POSSIBLE CAUSE

REMEDY

 

 

 

Unit does not operate and

No electrical supply

Plug unit in or check circuit breaker.

electronic display is blank.

 

 

Low air temperature around unit

Surrounding air temperature must be at least 50°F.

 

 

 

 

No interior light (Model CLRCO2175)

No power to unit

Make sure power cord is plugged in.

 

 

 

 

Loose or burned out bulb

Tighten or replace bulb (See MAINTENANCE; LIGHT

 

 

BULB REPLACEMENT).

 

 

 

Electronic display is blank and

A display function has changed.

Touch and hold the warmer temperature button and

interior light is ON with door OPEN

 

touch and release the POWER button three times, then

(Model CLRCO2175).

 

release the temperature button. The display should

 

 

become visible.

 

 

 

Electronic display is blank with door

A display function has changed.

Touch and hold the warmer temperature button and

OPEN (Model CLR2160).

 

touch and release the POWER button three times, then

 

 

release the temperature button. The display should

 

 

become visible.

 

 

 

Electronic display shows repeating,

A factory control mode has been

Touch and hold the warmer temperature button and

randomly flashing symbols and

inadvertently entered.

touch and release the LIGHT button three times, then

partial characters.

 

release the temperature button to exit the factory

 

 

control mode. The set-point temperature should now

 

 

be displayed.

 

 

 

Electronic display shows:

A factory control mode has been

Repeatedly touch the warmer temperature button to

0, 1 to 26, or 99.

inadvertently entered.

advance any number shown to 99 and touch and

 

 

release the LIGHT button. The set-point temperature

 

 

should now be displayed.

 

 

 

Electronic display shows E3.

Door has been left open longer than

Close door completely. The set-point temperature

 

20 minutes.

should now be displayed.

 

 

 

Electronic display shows one or

The unit is displaying an error code.

Record the error code(s) displayed and call for service.

more of the following:

 

 

E1, E2, E4, E5, E6, E7, E8, E9, E10, P1.

 

 

 

 

 

The unit is not cold enough.

Dirty condenser coils

Clean condenser (See MAINTENANCE; CONDENSER

 

 

CLEANING).

 

 

 

 

Airflow to front grille blocked

Airflow must not be obstructed to front grille (See

 

 

OPERATION).

 

 

 

 

Temperature not set cold enough

Use the temperature controller to set temperature

 

(Model CLRCO2175)

colder. Allow 24 hours for temperature to stabilize.

 

 

 

 

Door is not closing completely.

Make sure no obstructions are blocking the door and

 

 

unit is level (See MAINTENANCE; LEVELING).

 

 

 

 

 

Door adjustment required (See MAINTENANCE; DOOR

 

 

ALIGNMENT CHECK AND ADJUSTMENT).

 

 

 

 

Door gasket not sealing properly

Adjust door (See MAINTENANCE; DOOR ALIGNMENT

 

 

CHECK AND ADJUSTMENT and DOOR REVERSAL).

 

 

 

Noise during operation

Certain sounds are normal.

Soft sounds from the fan, water running in the ice

 

 

maker and the sound of ice dropping will be heard.

 

 

 

Fresh food section too cold (Model

Temperature control set too cold

Use the temperature controller to set temperature

CLRCO2175)

 

warmer.

 

 

 

Unit runs but no ice is produced.

No water being supplied to the unit

Check to see that water is connected and turned on to

 

 

the unit.

 

 

 

24

CLR2160, CLRCO2175

Image 24
Contents Use and Care Guide CLR2160CLRCO2175Warranty Registration Please Record Your Model InformationIntroduction Table of Contents This page intentionally left blank CLR2160, CLRCO2175 Safety Alert Definitions General PrecautionsSafety Precautions Product Features Exclusive Features of ÉchelonCLR2160 Initial Startup Other Site RequirementsOperation Temperature Control Checking Product TemperatureTemperature Display Selection Interior LightingTemperature Display Adjusting TemperatureNormal Operating Sounds Outdoor UsageStorage, Vacation, Moving Product DisposalGeneral Cleaning MaintenanceCleaning and Maintenance Condenser Cleaning Clear Ice Maker MaintenanceRemove inside front cover Ice Cube Thickness Adjustment Interval As Required LevelingDoor Alignment Check and Adjustment 175 mmDoor Reversal ULIN0002A Glass Shelf Removal/Installation Door Shelf Removal/InsertionLight Bulb Replacement Drain ConnectionPrepare Plumbing Gravity DrainFactory-Installed Drain Pump Locally-Installed Drain Pump Water Supply Connection Electrical Specifications Before Calling for ServiceIf Service is Required Replacement PartsTroubleshooting Guide Electrocution HazardMaintenance ICE Maker Self Cleaning Cycle Electronic Control Quick Guide All Models Task Touch Display CommentLine Corporation Limited Warranty For General Inquiries For Service and Parts Assistance
Related manuals
Manual 180 pages 38.87 Kb

CLR2160, CLRCO2175 specifications

The U-Line CLRCO2175 and CLR2160 are standout models in the world of compact refrigeration solutions, offering remarkable features tailored for modern living. Known for their slim design and efficient performance, these models are perfect for homeowners seeking added convenience without sacrificing space or style.

The U-Line CLRCO2175 boasts a capacity of 5.3 cubic feet, providing ample storage while maintaining a sleek profile. Its glass door is a key highlight, featuring Low-E argon gas-filled glass which not only enhances visibility but also provides energy efficiency by minimizing heat transfer. The model includes a built-in ice maker, delivering a continuous supply of fresh ice, which is ideal for entertaining or everyday use.

On the other hand, the CLR2160 offers a slightly smaller capacity of 3.4 cubic feet, perfectly suited for tighter spaces while still delivering on performance. It features the same stylish glass door and energy-efficient insulation, ensuring that your favorite beverages and snacks are kept at optimal temperatures.

Both models are equipped with a digital control panel that allows for precise temperature adjustments, catering to the specific needs of various items from wine to soft drinks. The internal shelving is adjustable, making it easy to customize the interior configuration to accommodate different bottle shapes and sizes.

Energy efficiency is a driving consideration in these models, as they are designed to consume less power compared to traditional refrigerators. This not only helps in reducing utility bills but also minimizes the environmental impact. Furthermore, U-Line has implemented noise-reducing technologies, ensuring quiet operation—ideal for placement in living spaces or open floor plans.

The sleek aesthetic of the CLRCO2175 and CLR2160 can seamlessly blend into various decor styles, from contemporary to traditional. With their stainless-steel finishes and elegant edge-to-edge glass doors, they serve not just as appliances but also as stylish additions to home interiors.

In conclusion, the U-Line CLRCO2175 and CLR2160 offer exceptional features and technologies tailored for modern living. Their space-saving designs, energy-efficient performance, and stylish aesthetics make these models essential choices for those looking to enhance their home with versatile refrigeration solutions. Whether entertaining guests or enjoying a quiet evening at home, these appliances provide the reliability and functionality needed in today’s fast-paced lifestyle.