JBL P941, P81 manual Unpacking, Invert speaker so it is in the upright position, Scrim Cloth

Page 4

UNPACKING

The P81 and P941 require special care and handling during unpacking. Pay particular attention to the precautions that appear in this section and to other precautions that appear throughout this owner’s manual.

When unpacking, save all packing materials for possible future shipping needs. Refer to the Obtaining Service section on page 14 for additional information.

™

¡

£

Figure 1: Unpacking the P81/P941

To Unpack the P81 and P941:

1.Place the packing carton in the upright position and fully open the top flaps, as shown in Step 1 of Figure 1.

2.Without allowing the top flaps to close, move the outer packing carton into an inverted position, as shown in Step 2 of Figure 1.

3.Lift the packing carton off of the loudspeaker, as shown in Step 3 of Figure 1. Use caution to avoid damaging the loudspeaker or frame clamps. At this point, the loudspeaker will be upside-down.

4.Remove the bottom pad, and then remove the frame alignment tool and grille from the grille filler. These items are identified in Figure 2.

5.Set aside the wall template, paint mask, fiberglass insulation, spacer shim, replacement scrim cloth and Allen keys.

6.Invert speaker so it is in the upright position.

7.When the P81/P941 is in the upright position, remove the top pad.

8.Leave the loudspeaker upright in the bottom pad until ready to install.

Allen Keys/Spacer Shim

 

Top Pad

Paint Mask

Protective

Wall Template

Cloth

 

 

Fiberglass

Grille

Insulation

Frame

 

 

Alignment Tool

 

Replacement

 

Bottom Pad

Scrim Cloth

 

 

Figure 2: Packing Materials

 

 

5

Page 3 Page 5
Image 4
Page 3 Page 5
Contents P81 P941 P81/P941 IN-WALL Loudspeakers Documentation ConventionsP81/P941 Highlights Product RegistrationIntroduction Exceptional accuracyInvert speaker so it is in the upright position UnpackingScrim Cloth Loudspeaker Overview TweeterHigh-Frequency Tilt Control WooferFilter Network Input ConnectorsInput Panel Loudspeaker Placement Installation ConsiderationsP81 and P941 should be installed by a professional Rear wall, as shown in FigureTo Install the P81/P941 Installation InstructionsLocate the wall studs Slide the baffle into place in the mounting frame Remove the frame alignment toolMaking Connections To Make ConnectionsOptimizing Performance To optimize the P81 and P941 for best performanceBegin playback of a familiar music or film source Apply one to two coats of paint for desired finishLoudspeaker Volume Levels To Paint the GrilleTo Attach the Grille To Remove the GrilleP81/P941 Specifications Obtaining ServiceIndex Harman International Company

P81, P941 specifications

JBL has long been synonymous with high-quality audio products, and their P941 and P81 models are no exception. These headphones cater to audiophiles and casual listeners alike, offering a balanced blend of performance, comfort, and innovative technology.

The JBL P941 is designed to deliver an immersive listening experience, featuring advanced Bluetooth connectivity that ensures seamless pairing with a wide range of devices. This model boasts a sleek, ergonomic design, which not only enhances comfort during extended use but also adds a touch of elegance to its aesthetic. The P941 incorporates JBL’s signature owlsound technology, where sound precision meets powerful bass delivery, allowing users to experience their favorite tracks with remarkable clarity.

The headphones come equipped with active noise-cancellation technology, which significantly reduces ambient noise, making them ideal for use in crowded environments or during travel. Alongside this, the P941 offers an impressive battery life, providing up to 30 hours of continuous playtime on a single charge. The rapid charge feature is particularly noteworthy, allowing for quick power-ups when needed. Additionally, they include integrated voice assistant support, enabling users to control music playback and access information hands-free.

On the other hand, the JBL P81 sets itself apart with its lightweight build and portable features. This model is targeted toward users who value flexibility without compromising sound quality. The P81 includes JBL Pure Bass technology, which delivers deep, punchy bass that is sure to please any music lover. The headphones offer a customizable fit due to their adjustable headband and rotating ear cups, ensuring comfort during long listening sessions.

The battery performance of the P81 is competitive, providing about 25 hours of playback time and quick charging capabilities. This model also emphasizes user interaction, with touch controls seamlessly integrated into the ear cups for easy navigation.

Both models come with a dedicated app, allowing users to personalize their sound preferences and update firmware. Whether you opt for the P941 or the P81, you can expect JBL’s commitment to quality, innovation, and a premium audio experience that caters to various listening styles. With their combination of comfort, outstanding sound quality, and practical features, these headphones are ideal choices for music lovers on the go.
Top Page Image Contents