JBL P941, P81 manual Filter Network, Input Panel, Input Connectors

Page 6

•Two high-grade neodymium magnets placed inside the voice coils for opti- mal magnetic shielding

•Symmetrical Field Geometry (SFG™) design for low overall distortion

•1-1/2-inch (38mm) voice coil wound on a fiberglass bobbin for high-power handling and low distortion

•Copper cap stabilizes inductance and controls flux modulation, dramatically reducing distortion

•Optimized and shielded magnetic cir- cuits to minimize harmonic distortion and prevent video monitor interfer- ence

FILTER NETWORK

Optimizes loudspeaker on- and off-axis response with a high-order filter at 2.8kHz for the P81, and high-order filters at 300Hz and 2kHz for the P941, helping to ensure smooth octave-to- octave balance and timbral accuracy. Gold-plated binding posts accommo- date heavy speaker cables, while separate Low-Frequency Boundary Compensation, High-Frequency Level, High-Frequency Tilt and Listener Axis controls provide precise balance to compensate for less-than-ideal listen- ing room acoustics and loudspeaker placement.

INPUT PANEL

Number 1 in Figure 5 corresponds to the numbered item below.

1. Input Connectors

Provide input connections from the associated power amplifier/receiver(s). One positive (+) gold-plated binding post and one negative (–) gold-plated binding post are available. Refer to the Making Connections section on page 11 for additional information.

P81

P941

Figure 5: Rear of P81 and P941

7

Page 5 Page 7
Image 6
Page 5 Page 7
Contents P81 P941 P81/P941 IN-WALL Loudspeakers Documentation ConventionsIntroduction P81/P941 HighlightsProduct Registration Exceptional accuracyUnpacking Invert speaker so it is in the upright positionScrim Cloth High-Frequency Tilt Control Loudspeaker OverviewTweeter WooferInput Connectors Filter NetworkInput Panel P81 and P941 should be installed by a professional Loudspeaker PlacementInstallation Considerations Rear wall, as shown in FigureInstallation Instructions To Install the P81/P941Locate the wall studs Slide the baffle into place in the mounting frame Remove the frame alignment toolMaking Connections To Make ConnectionsBegin playback of a familiar music or film source Optimizing PerformanceTo optimize the P81 and P941 for best performance Apply one to two coats of paint for desired finishTo Attach the Grille Loudspeaker Volume LevelsTo Paint the Grille To Remove the GrilleP81/P941 Specifications Obtaining ServiceIndex Harman International Company

P81, P941 specifications

JBL has long been synonymous with high-quality audio products, and their P941 and P81 models are no exception. These headphones cater to audiophiles and casual listeners alike, offering a balanced blend of performance, comfort, and innovative technology.

The JBL P941 is designed to deliver an immersive listening experience, featuring advanced Bluetooth connectivity that ensures seamless pairing with a wide range of devices. This model boasts a sleek, ergonomic design, which not only enhances comfort during extended use but also adds a touch of elegance to its aesthetic. The P941 incorporates JBL’s signature owlsound technology, where sound precision meets powerful bass delivery, allowing users to experience their favorite tracks with remarkable clarity.

The headphones come equipped with active noise-cancellation technology, which significantly reduces ambient noise, making them ideal for use in crowded environments or during travel. Alongside this, the P941 offers an impressive battery life, providing up to 30 hours of continuous playtime on a single charge. The rapid charge feature is particularly noteworthy, allowing for quick power-ups when needed. Additionally, they include integrated voice assistant support, enabling users to control music playback and access information hands-free.

On the other hand, the JBL P81 sets itself apart with its lightweight build and portable features. This model is targeted toward users who value flexibility without compromising sound quality. The P81 includes JBL Pure Bass technology, which delivers deep, punchy bass that is sure to please any music lover. The headphones offer a customizable fit due to their adjustable headband and rotating ear cups, ensuring comfort during long listening sessions.

The battery performance of the P81 is competitive, providing about 25 hours of playback time and quick charging capabilities. This model also emphasizes user interaction, with touch controls seamlessly integrated into the ear cups for easy navigation.

Both models come with a dedicated app, allowing users to personalize their sound preferences and update firmware. Whether you opt for the P941 or the P81, you can expect JBL’s commitment to quality, innovation, and a premium audio experience that caters to various listening styles. With their combination of comfort, outstanding sound quality, and practical features, these headphones are ideal choices for music lovers on the go.
Top Page Image Contents