Smeg STA4645 Using the rinse-aid and detergent dispensers, User Instructions, Ed As Required

Page 34
4.2 Using the rinse-aid and detergent dispensers

USER INSTRUCTIONS

EN

4.2 Using the rinse-aid and detergent dispensers

The detergent and rinse aid dispensers are situated on the inner part of the door: the detergent dispenser (ref. A fi g. 4-03) is on the left, and the rinse- aid dispenser (ref. B fi g. 4-03) is on the right.

A

B

Fig. 4-03

WITH THE EXCEPTION OF THE SOAK PROGRAM, BEFORE EV- ERY WASHING CYCLE IT IS NECESSARY TO ADD THE REQUIRED AMOUNT OF DETERGENT TO THE DETERGENT DISPENSER. THE RINSE AID, ON THE OTHER HAND, SHOULD ONLY BE ADD-

ED AS REQUIRED.

Rev 0.0

17

Image 34
Contents GUIDE FOR USING THE DISHWASHER AND THE WASHING PROGRAMS INSTRUCTION MANUALCONTENTS CONTENTSPage 1 INTRODUCTION INTRODUCTIONNomenclature of figures and tables Symbols used in this manual see tab This symbol highlights general information and warnings TabUSER INSTRUCTIONS 2 DESCRIPTION AND USE OF THE CONTROLS 2.1 Upper panel2.2 Setting the washing program and switching on and off USER INSTRUCTIONSETL SANITATION LISTED2.2.3 End of program 2.2.1 Switching on2.2.2 Selecting and starting the program Before starting a washing program, make sure that2.2.4 Interrupting a program 2.2.6 Canceling the current program2.2.5 Changing the current program 2.2.7 Options PROGRAM DELAY2.3 Additional functions 2.2.8 Switching off2.3.1 Adjusting the water softener 3., 4., 5., 0., 1Water hardness table see tab WATER HARDNESS3 ENERGY SAVING AND ENVIRONMENTAL RESPECT 4 REMOVING THE DISHES 5 TROUBLESHOOTING Alarms E1, E3, E4, immediately terminate the current program Contents Page This manual comprises the following sections Thank you for choosing one of our products. To use this dishwasher correctly and safely, please read this manual carefully. The manual is divided into sections giving you a step-by-step guide to all your appliance’s functions. The texts are easy to understand and are complete with detailed illustrations. Following the cleaning instruc- tions provided here will keep dishwasher performance at peak levels in the long term. This user-friendly manual will provide answers to all your questions about use of the dishwasherSymbols used in this manual see tab WARNINGS 2 IMPORTANT SAFETY INSTRUCTIONSave this instructions WARNINGS ONLY USE RINSE-AID SPECIALLY FORMULATED FOR DOMESTIC DISHWASHERS DO NOT INTRODUCE ANIMALS INTO THE DISHWASHER DO NOT LEAN AGAINST OR STAND ON THE DISHWASHER RACKSATTEMPT TO REPAIR THE APPLIANCE THE MANUFACTURER DECLINES ALL RESPONSIBIL- ITY FOR DAMAGE TO PERSONS, ANIMALS OR PROPER- TY RESULTING FROM FAILURE TO OBSERVE THE ABOVE PRECAUTIONS, FROM TAMPERING WITH EVEN A SINGLE COMPONENT OF THE APPLIANCE, OR FROM THE USE OF UNORIGINAL SPARE PARTS INSTALLATION INSTRUCTIONS 3 INSTALLATION AND HOOK-UPINSTALLATION INSTRUCTIONS INSTALLATION INSTRUCTIONS adjust the water softening system add the regenerating salt 4 OPERATING INSTRUCTIONSadd the rinse-aid and detergent 4.1 Using the water softening system When using the dishwasher for the fi rst time, in addition to the salt it is also necessary to add one liter of water to the container 4.2 Using the rinse-aid and detergent dispensers ED AS REQUIRED4.2.2 Adjusting the rinse-aid dispenser setting 4.2.1 Adding the rinse-aid4.2.3 Adding the detergent When a program with hot prewash is selected see program table in the “De- scription of Controls” manual, extra detergent must be placed in the cavity ref. A or B fi g. 4-06, depending on models 4.3 General warnings and recommendations Items which are not dishwasher-safe MAKE SURE that the items being washed are dishwasher-safeDishes and objects in copper, tin, zinc or brass these tend to stain 4.4 Using the racks 4.4.1 Lower rack Con supporti fissiEsempi di caricamento Loading the lower rack see fi gLoading examples 4.4.2 Cutlery basket see fi g 4.4.3 Upper rack vedi fi g. 4-12 Loading the upper rack vedi fi g EsempiLoading caricamentoexamplesAdjusting the upper rack 5.1 General warnings and recommendations 5 CLEANING AND USER-MAINTENANCENEVER USE ABRASIVE AND/OR CORROSIVE DETERGENTS TO CLEAN THE APPLIANCE 5.3 Cleaning the spray arms 5.2 Cleaning the water intake filter only some modelsRemoving the spray arms USER INSTRUCTIONS 5.4 Cleaning the filter unit 5.5 General warnings and recommendations for correct maintenance Prolonged disuse 5.6 Troubleshooting minor problemsIf the dishes do not come out clean, check that Before starting the dishwasher after prolonged disuseIf the dishes show signs of streaking, staining, etc., check that If the dishes fail to dry or remain dull, check thatIf there are visible traces of rust inside the tank 6 TECHNICAL DATA SEE TAB CONTENTS Page INTRODUCTION INTRODUCTION 2 SAFETY INFORMATION WARNINGSTWO PEOPLE WEARING SAFETY GLOVES ARE REQUIRED TO LIFT THE DISHWASHER REPAIR THE APPLIANCEWARNINGS INSTALLATION INSTRUCTIONS 3 INSTALLATION MATERIALB A D C F E H G I L 3.1 Kit supplied with dishwasher INSTALLATION INSTRUCTIONSmodels sta4645/sta8743 3.2 Kit supplied with dishwasher models pla8743 A B D E F G H IDIMENSIONS OF DISHWASHER See fi g 5 INSTALLATION AND HOOK-UP Only for free-standing models5.1 Leveling 5.1.1 Mounting the feet only for some models5.1.2 Levelling the appliance 5.2 Connections FIRE HAZARD DO NOT COVER OR CRUSH THE CORD PLUG5.2.1 Connecting to the water supply 5.2.1.1 Connecting to the water tap Do not cut the inlet hose see fi g 3-59/64” 5.2.1.2 Connecting the drain hose Connecting to a drainMAX 100 cm min O4 cmConnecting to a “T” union of the drain circuit D fi g. 5-11 do not cut the corrugated sectionConnecting to a waste disposal unit with an air gap Connecting to the air gap no waste disposal unit Connecting to a waste disposal unit no air gap A D C B5.2.2 Electrical connections and warnings Grounding instructions5.3.1 Installation procedure all models 5.3 CommissioningINSTALLATION INSTRUCTIONS 5.3.2 Procedure for mounting the door panel Mount the door panelsee fi g Insert the door spacers contained in the accessory bag see fi gN.B. the screws are not supplied Attach the door panel fi t the hooks into their slots on the dishwasher and allow the panel to slide downwards and slip in to place see fi g 4.2” 5.3.3 Procedure for mounting the door panel models pla8743If a gap is created between the control panel and the door panel ref. A fi g. 5-29, use the supplied strips ref. B fi g. 5-29 to fi ll it. The number of strips depends on the size of the gap INSTALLATION INSTRUCTIONS INSTALLATION INSTRUCTIONS 5.3.4 Completion of installation all models Remove the adhesive band on the gasket see fi g INSTALLATION INSTRUCTIONS 5.4 Testing 19 570 0074