Contents
INSTRUCTION MANUAL
GUIDE FOR USING THE DISHWASHER AND THE WASHING PROGRAMS
CONTENTS
CONTENTS
Page
1 INTRODUCTION
INTRODUCTION
Nomenclature of figures and tables
This symbol highlights general information and warnings Tab
Symbols used in this manual see tab
2 DESCRIPTION AND USE OF THE CONTROLS 2.1 Upper panel
USER INSTRUCTIONS
USER INSTRUCTIONS
2.2 Setting the washing program and switching on and off
LISTED
ETL SANITATION
Before starting a washing program, make sure that
2.2.1 Switching on
2.2.2 Selecting and starting the program
2.2.3 End of program
2.2.4 Interrupting a program
2.2.6 Canceling the current program
2.2.5 Changing the current program
PROGRAM DELAY
2.2.7 Options
3., 4., 5., 0., 1
2.2.8 Switching off
2.3.1 Adjusting the water softener
2.3 Additional functions
WATER HARDNESS
Water hardness table see tab
3 ENERGY SAVING AND ENVIRONMENTAL RESPECT
4 REMOVING THE DISHES
5 TROUBLESHOOTING
Alarms E1, E3, E4, immediately terminate the current program
Contents
Page
Thank you for choosing one of our products. To use this dishwasher correctly and safely, please read this manual carefully. The manual is divided into sections giving you a step-by-step guide to all your appliance’s functions. The texts are easy to understand and are complete with detailed illustrations. Following the cleaning instruc- tions provided here will keep dishwasher performance at peak levels in the long term. This user-friendly manual will provide answers to all your questions about use of the dishwasher
This manual comprises the following sections
INTRODUCTION
WARNINGS
2 IMPORTANT SAFETY INSTRUCTION
Save this instructions
WARNINGS
ONLY USE RINSE-AID SPECIALLY FORMULATED FOR DOMESTIC DISHWASHERS
DO NOT LEAN AGAINST OR STAND ON THE DISHWASHER RACKS
DO NOT INTRODUCE ANIMALS INTO THE DISHWASHER
ATTEMPT TO REPAIR THE APPLIANCE
THE MANUFACTURER DECLINES ALL RESPONSIBIL- ITY FOR DAMAGE TO PERSONS, ANIMALS OR PROPER- TY RESULTING FROM FAILURE TO OBSERVE THE ABOVE PRECAUTIONS, FROM TAMPERING WITH EVEN A SINGLE COMPONENT OF THE APPLIANCE, OR FROM THE USE OF UNORIGINAL SPARE PARTS
3 INSTALLATION AND HOOK-UP
INSTALLATION INSTRUCTIONS
INSTALLATION INSTRUCTIONS
INSTALLATION INSTRUCTIONS
adjust the water softening system add the regenerating salt
4 OPERATING INSTRUCTIONS
add the rinse-aid and detergent
4.1 Using the water softening system
When using the dishwasher for the fi rst time, in addition to the salt it is also necessary to add one liter of water to the container
ED AS REQUIRED
4.2 Using the rinse-aid and detergent dispensers
4.2.1 Adding the rinse-aid
4.2.2 Adjusting the rinse-aid dispenser setting
4.2.3 Adding the detergent
When a program with hot prewash is selected see program table in the “De- scription of Controls” manual, extra detergent must be placed in the cavity ref. A or B fi g. 4-06, depending on models
4.3 General warnings and recommendations
Items which are not dishwasher-safe
MAKE SURE that the items being washed are dishwasher-safe
Dishes and objects in copper, tin, zinc or brass these tend to stain
4.4 Using the racks
Con supporti fissi
4.4.1 Lower rack
Esempi di caricamento
Loading the lower rack see fi g
Loading examples
4.4.2 Cutlery basket see fi g
4.4.3 Upper rack vedi fi g. 4-12
EsempiLoading caricamentoexamples
Loading the upper rack vedi fi g
Adjusting the upper rack
5.1 General warnings and recommendations
5 CLEANING AND USER-MAINTENANCE
NEVER USE ABRASIVE AND/OR CORROSIVE DETERGENTS TO CLEAN THE APPLIANCE
5.3 Cleaning the spray arms
5.2 Cleaning the water intake filter only some models
Removing the spray arms
USER INSTRUCTIONS
5.4 Cleaning the filter unit
5.5 General warnings and recommendations for correct maintenance
Before starting the dishwasher after prolonged disuse
5.6 Troubleshooting minor problems
If the dishes do not come out clean, check that
Prolonged disuse
If the dishes show signs of streaking, staining, etc., check that
If the dishes fail to dry or remain dull, check that
If there are visible traces of rust inside the tank
6 TECHNICAL DATA SEE TAB
CONTENTS
Page
INTRODUCTION
INTRODUCTION
WARNINGS
2 SAFETY INFORMATION
REPAIR THE APPLIANCE
TWO PEOPLE WEARING SAFETY GLOVES ARE REQUIRED TO LIFT THE DISHWASHER
WARNINGS
INSTALLATION INSTRUCTIONS
3 INSTALLATION MATERIAL
B A D C F E H G I L
3.1 Kit supplied with dishwasher
INSTALLATION INSTRUCTIONS
models sta4645/sta8743
A B D E F G H I
3.2 Kit supplied with dishwasher models pla8743
DIMENSIONS OF DISHWASHER See fi g
Only for free-standing models
5 INSTALLATION AND HOOK-UP
5.1.1 Mounting the feet only for some models
5.1 Leveling
5.1.2 Levelling the appliance
FIRE HAZARD DO NOT COVER OR CRUSH THE CORD PLUG
5.2 Connections
5.2.1 Connecting to the water supply
5.2.1.1 Connecting to the water tap
Do not cut the inlet hose see fi g
min O4 cm
5.2.1.2 Connecting the drain hose Connecting to a drain
MAX 100 cm
3-59/64”
D fi g. 5-11 do not cut the corrugated section
Connecting to a “T” union of the drain circuit
Connecting to a waste disposal unit with an air gap
Connecting to the air gap no waste disposal unit
A D C B
Connecting to a waste disposal unit no air gap
Grounding instructions
5.2.2 Electrical connections and warnings
5.3 Commissioning
5.3.1 Installation procedure all models
INSTALLATION INSTRUCTIONS
Mount the door panel
5.3.2 Procedure for mounting the door panel
see fi g
Insert the door spacers contained in the accessory bag see fi g
N.B. the screws are not supplied
Attach the door panel fi t the hooks into their slots on the dishwasher and allow the panel to slide downwards and slip in to place see fi g
4.2”
models pla8743
5.3.3 Procedure for mounting the door panel
If a gap is created between the control panel and the door panel ref. A fi g. 5-29, use the supplied strips ref. B fi g. 5-29 to fi ll it. The number of strips depends on the size of the gap
INSTALLATION INSTRUCTIONS
INSTALLATION INSTRUCTIONS
5.3.4 Completion of installation all models
Remove the adhesive band on the gasket see fi g
INSTALLATION INSTRUCTIONS
5.4 Testing
19 570 0074