Smeg STA4645 instruction manual Connections, Installation Instructions

INSTALLATION INSTRUCTIONS EN

A

Fig. 5-03

5.2Connections

Install the dishwasher so as to allow ease of access to the electrical and hy- draulic connections through the adjacent unit. These connections must never be behind the dishwasher.

The inlet and drain hoses can be pointed in all directions. make sure that they are not bent, crushed or too tight. Tighten the ring nut after pointing the hoses in the required direction.

Figure 5-04 indicates the distances to maintain between the dishwasher and the various connections.

FIRE HAZARD!

DO NOT COVER OR CRUSH THE CORD PLUG.

A
B	D
	C
A = 1200 mm / 47”
B = 1500 mm / 59”
C = 1600 mm / 63”
D = min. 400 mm / 16”	Fig. 5-04

Rev 0.0 15