Smeg STA4645 Installation Instructions, Remove the adhesive band on the gasket see fi g

EN INSTALLATION INSTRUCTIONS

Before securing the dishwasher to the adjacent units, attach the gaskets to the sides.

Remove the adhesive band on the gasket (see fi g. 5-37).

Fig. 5-37

Fix the gasket to the dishwasher, inserting it in the seat on the sides towards the front (see fi g. 5-38), and making sure that the long side of the gasket, the one with the hole for inserting the screw, is attached to the outside of the dish- washer; the hole in the long side must match the hole in the dishwasher (see ref. A fi g. 5-39). Make sure the gasket adheres perfectly to the dishwasher.

Fig. 5-38

36 Rev 0.0