Smeg STA4645U manual User Instructions

Page 37
•When a program with hot prewash is selected (see program table in the “De- scription of Controls” manual), extra detergent must be placed in the cavity (ref. A or B fi g. 4-06, depending on models).

EN

USER INSTRUCTIONS

A

B

 

Fig. 4-06

When a program with hot prewash is selected (see program table in the “De- scription of Controls” manual), extra detergent must be placed in the cavity (ref. A or B fi g. 4-06, depending on models).

Only use dishwasher-specifi c detergents. For optimal washing results it is important to use a good quality detergent.

The detergent packs must be sealed and stored in a dry place to prevent the formation of lumps which may negatively affect washing results. Once opened the detergent packs should not be kept for too long, otherwise the detergent loses its effectiveness.

Do not use detergents formulated for washing dishes by hand, because they produce a great deal of foam and may negatively affect the operation of the dishwasher.

Add the correct amount of detergent. An insuffi cient amount of detergent will result in a partial removal of dirt from the dishes, whereas an excessive amount is wasteful and does not improve the washing results.

The market offers liquid and powder detergents with differing chemical com- positions, which may contain phosphates, or be phosphate-free but con- tain natural enzymes.

Detergents containing phosphates are more effective against grease and starch at temperatures above 60°C (140°F).

Enzyme detergents, on the other hand, are also effective at lower tempera- tures (from 40 to 55°C / from 104 to 131°F) and are more easily biodegrad- able. With enzyme detergents it is possible to obtain at low temperatures comparable results to those which can only be achieved at 65°C (149°F) using traditional detergents. For the safeguarding of the environment we recommend the use of phosphate- and chlorine-freedetergents.

20

Rev 0.0

Image 37
Contents INSTRUCTION MANUAL GUIDE FOR USING THE DISHWASHER AND THE WASHING PROGRAMSCONTENTS CONTENTSPage 1 INTRODUCTION INTRODUCTIONNomenclature of figures and tables This symbol highlights general information and warnings Tab Symbols used in this manual see tab2 DESCRIPTION AND USE OF THE CONTROLS 2.1 Upper panel USER INSTRUCTIONSUSER INSTRUCTIONS 2.2 Setting the washing program and switching on and offLISTED ETL SANITATION2.2.2 Selecting and starting the program 2.2.1 Switching on2.2.3 End of program Before starting a washing program, make sure that2.2.4 Interrupting a program 2.2.6 Canceling the current program2.2.5 Changing the current program PROGRAM DELAY 2.2.7 Options2.3.1 Adjusting the water softener 2.2.8 Switching off2.3 Additional functions 3., 4., 5., 0., 1WATER HARDNESS Water hardness table see tab3 ENERGY SAVING AND ENVIRONMENTAL RESPECT 4 REMOVING THE DISHES 5 TROUBLESHOOTING Alarms E1, E3, E4, immediately terminate the current program Contents Page Thank you for choosing one of our products. To use this dishwasher correctly and safely, please read this manual carefully. The manual is divided into sections giving you a step-by-step guide to all your appliance’s functions. The texts are easy to understand and are complete with detailed illustrations. Following the cleaning instruc- tions provided here will keep dishwasher performance at peak levels in the long term. This user-friendly manual will provide answers to all your questions about use of the dishwasher This manual comprises the following sectionsINTRODUCTION WARNINGS 2 IMPORTANT SAFETY INSTRUCTIONSave this instructions WARNINGS ONLY USE RINSE-AID SPECIALLY FORMULATED FOR DOMESTIC DISHWASHERS DO NOT LEAN AGAINST OR STAND ON THE DISHWASHER RACKS DO NOT INTRODUCE ANIMALS INTO THE DISHWASHERATTEMPT TO REPAIR THE APPLIANCE THE MANUFACTURER DECLINES ALL RESPONSIBIL- ITY FOR DAMAGE TO PERSONS, ANIMALS OR PROPER- TY RESULTING FROM FAILURE TO OBSERVE THE ABOVE PRECAUTIONS, FROM TAMPERING WITH EVEN A SINGLE COMPONENT OF THE APPLIANCE, OR FROM THE USE OF UNORIGINAL SPARE PARTS 3 INSTALLATION AND HOOK-UP INSTALLATION INSTRUCTIONSINSTALLATION INSTRUCTIONS INSTALLATION INSTRUCTIONS adjust the water softening system add the regenerating salt 4 OPERATING INSTRUCTIONSadd the rinse-aid and detergent 4.1 Using the water softening system When using the dishwasher for the fi rst time, in addition to the salt it is also necessary to add one liter of water to the container ED AS REQUIRED 4.2 Using the rinse-aid and detergent dispensers4.2.1 Adding the rinse-aid 4.2.2 Adjusting the rinse-aid dispenser setting4.2.3 Adding the detergent When a program with hot prewash is selected see program table in the “De- scription of Controls” manual, extra detergent must be placed in the cavity ref. A or B fi g. 4-06, depending on models 4.3 General warnings and recommendations Items which are not dishwasher-safe MAKE SURE that the items being washed are dishwasher-safeDishes and objects in copper, tin, zinc or brass these tend to stain 4.4 Using the racks Con supporti fissi 4.4.1 Lower rackEsempi di caricamento Loading the lower rack see fi gLoading examples 4.4.2 Cutlery basket see fi g 4.4.3 Upper rack vedi fi g. 4-12 EsempiLoading caricamentoexamples Loading the upper rack vedi fi gAdjusting the upper rack 5.1 General warnings and recommendations 5 CLEANING AND USER-MAINTENANCENEVER USE ABRASIVE AND/OR CORROSIVE DETERGENTS TO CLEAN THE APPLIANCE 5.3 Cleaning the spray arms 5.2 Cleaning the water intake filter only some modelsRemoving the spray arms USER INSTRUCTIONS 5.4 Cleaning the filter unit 5.5 General warnings and recommendations for correct maintenance If the dishes do not come out clean, check that 5.6 Troubleshooting minor problemsProlonged disuse Before starting the dishwasher after prolonged disuseIf the dishes show signs of streaking, staining, etc., check that If the dishes fail to dry or remain dull, check thatIf there are visible traces of rust inside the tank 6 TECHNICAL DATA SEE TAB Contents CONTENTSPage 1 INTRODUCTION INTRODUCTIONNomenclature of figures and tables INTRODUCTION EDGE OF THE DOOR MUST NEVER BE REMOVED 2 SAFETY INFORMATIONREPAIR THE APPLIANCE TWO PEOPLE WEARING SAFETY GLOVES ARE REQUIRED TO LIFT THE DISHWASHERWARNINGS INSTALLATION INSTRUCTIONS 3 INSTALLATION MATERIALB A D C F G I Lmodels sta4645/sta8743 3.1 Kit supplied with dishwasher3.2 Kit supplied with dishwasher models pla8743 DIMENSIONS OF DISHWASHER See fi g Only for free-standing models 5 INSTALLATION AND HOOK-UP5.1.1 Mounting the feet only for some models 5.1 Leveling5.1.2 Levelling the appliance FIRE HAZARD DO NOT COVER OR CRUSH THE CORD PLUG 5.2 Connections5.2.1 Connecting to the water supply 5.2.1.1 Connecting to the water tap Do not cut the inlet hose see fi g MAX 100 cm 5.2.1.2 Connecting the drain hose Connecting to a drain3-59/64” min O4 cmAvailable from any plumbing stockist Connecting to a “T” union of the drain circuitConnecting to a waste disposal unit with an air gap Connecting to the air gap no waste disposal unit A D C B Connecting to a waste disposal unit no air gapGrounding instructions 5.2.2 Electrical connections and warnings5.3 Commissioning 5.3.1 Installation procedure all modelsINSTALLATION INSTRUCTIONS Mount the door panel 5.3.2 Procedure for mounting the door panelsee fi g Secure the door to the panel with the supplied screws. The panel must have a minimum thickness of 20 mm 25/32” see fi g INSTALLATION INSTRUCTIONS models pla8743 5.3.3 Procedure for mounting the door panelINSTALLATION INSTRUCTIONS INSTALLATION INSTRUCTIONS INSTALLATION INSTRUCTIONS 5.3.4 Completion of installation all models Remove the adhesive band on the gasket see fi g INSTALLATION INSTRUCTIONS 5.4 Testing 19 570 0074