Smeg STA4645U Warnings, Two People Wearing Safety Gloves Are Required To Lift The Dishwasher

Page 60

TWO PEOPLE WEARING SAFETY GLOVES ARE REQUIRED TO LIFT THE DISHWASHER.

EN

WARNINGS

TWO PEOPLE WEARING SAFETY GLOVES ARE REQUIRED TO LIFT THE DISHWASHER.

DO NOT LEAVING DISCARDED PACKAGING MATERIALS UNSU- PERVISED WITHIN THE HOME. SEPARATE THE VARIOUS PACK- AGING MATERIALS AND TAKE THEM TO THE NEAREST SORTED WASTE COLLECTION CENTRE. KEEP CHILDREN, PHYSICALLY AND/OR MENTALLY IMPAIRED ADULTS, AND ANIMALS AWAY FROM PACKAGING WASTE; DANGER OF SUFFOCATION.

BEFORE PROCEEDING WITH INSTALLATION, DISCONNECT THE MAINS POWER SUPPLY FROM THE WORK AREA.

DURING INSTALLATION, TAKE CARE NOT TO INJURE YOURSELF ON THE SHARP EDGES OF THE APPLIANCE; WEAR SAFETY GLOVES.

THE APPLIANCE MUST BE PROVIDED WITH A GROUND CON- NECTION IN ACCORDANCE WITH THE ELECTRICAL SAFETY REGULATIONS IN FORCE. IF IN DOUBT, HAVE THE SYSTEM CHECKED BY A QUALIFIED ELECTRICIAN.

THE MANUFACTURER DECLINES ALL RESPONSIBILITY FOR DAMAGE TO PERSONS OR PROPERTY RESULTING FROM THE FAILURE TO GROUND THE APPLIANCE OR FROM A DE- FECTIVE GROUND CONNECTION.

DO NOT USE APPLIANCES WHICH HAVE BEEN DAMAGED DUR- ING TRANSIT! IF IN DOUBT, CONSULT YOUR DEALER. THE APPLI- ANCE MUST BE INSTALLED AND CONNECTED IN ACCORDANCE WITH THE INSTRUCTIONS PROVIDED BY THE MANUFACTURER OR BY A QUALIFIED TECHNICIAN.

DO NOT OPERATE THE DISHWASHER UNLESS ALL THE OUTER PANELS HAVE BEEN POSITIONED CORRECTLY.

IMMEDIATELY AFTER INSTALLATION, BRIEFLY TEST THE APPLI- ANCE FOLLOWING THE INSTRUCTIONS INDICATED BELOW. IF THE DISHWASHER FAILS TO OPERATE CORRECTLY, DISCON- NECT IT FROM THE ELECTRICAL POWER SUPPLY AND CALL THE NEAREST TECHNICAL SERVICE CENTRE. DO NOT ATTEMPT TO

REPAIR THE APPLIANCE.

6

Rev 0.0

Image 60

Contents GUIDE FOR USING THE DISHWASHER AND THE WASHING PROGRAMS INSTRUCTION MANUALCONTENTS CONTENTSPage INTRODUCTION 1 INTRODUCTIONNomenclature of ﬁgures and tables Symbols used in this manual see tab This symbol highlights general information and warnings TabUSER INSTRUCTIONS 2 DESCRIPTION AND USE OF THE CONTROLS 2.1 Upper panel2.2 Setting the washing program and switching on and off USER INSTRUCTIONSETL SANITATION LISTED2.2.1 Switching on 2.2.2 Selecting and starting the program2.2.3 End of program Before starting a washing program, make sure that2.2.6 Canceling the current program 2.2.4 Interrupting a program2.2.5 Changing the current program 2.2.7 Options PROGRAM DELAY2.2.8 Switching off 2.3.1 Adjusting the water softener2.3 Additional functions 3., 4., 5., 0., 1Water hardness table see tab WATER HARDNESS3 ENERGY SAVING AND ENVIRONMENTAL RESPECT 4 REMOVING THE DISHES 5 TROUBLESHOOTING Alarms E1, E3, E4, immediately terminate the current program Contents Page This manual comprises the following sections Thank you for choosing one of our products. To use this dishwasher correctly and safely, please read this manual carefully. The manual is divided into sections giving you a step-by-step guide to all your appliance’s functions. The texts are easy to understand and are complete with detailed illustrations. Following the cleaning instruc- tions provided here will keep dishwasher performance at peak levels in the long term. This user-friendly manual will provide answers to all your questions about use of the dishwasherSymbols used in this manual see tab 2 IMPORTANT SAFETY INSTRUCTION WARNINGSSave this instructions WARNINGS ONLY USE RINSE-AID SPECIALLY FORMULATED FOR DOMESTIC DISHWASHERS DO NOT INTRODUCE ANIMALS INTO THE DISHWASHER DO NOT LEAN AGAINST OR STAND ON THE DISHWASHER RACKSATTEMPT TO REPAIR THE APPLIANCE THE MANUFACTURER DECLINES ALL RESPONSIBIL- ITY FOR DAMAGE TO PERSONS, ANIMALS OR PROPER- TY RESULTING FROM FAILURE TO OBSERVE THE ABOVE PRECAUTIONS, FROM TAMPERING WITH EVEN A SINGLE COMPONENT OF THE APPLIANCE, OR FROM THE USE OF UNORIGINAL SPARE PARTS INSTALLATION INSTRUCTIONS 3 INSTALLATION AND HOOK-UPINSTALLATION INSTRUCTIONS INSTALLATION INSTRUCTIONS 4 OPERATING INSTRUCTIONS adjust the water softening system add the regenerating saltadd the rinse-aid and detergent 4.1 Using the water softening system When using the dishwasher for the ﬁ rst time, in addition to the salt it is also necessary to add one liter of water to the container 4.2 Using the rinse-aid and detergent dispensers ED AS REQUIRED4.2.2 Adjusting the rinse-aid dispenser setting 4.2.1 Adding the rinse-aid4.2.3 Adding the detergent When a program with hot prewash is selected see program table in the “De- scription of Controls” manual, extra detergent must be placed in the cavity ref. A or B ﬁ g. 4-06, depending on models 4.3 General warnings and recommendations MAKE SURE that the items being washed are dishwasher-safe Items which are not dishwasher-safeDishes and objects in copper, tin, zinc or brass these tend to stain 4.4 Using the racks 4.4.1 Lower rack Con supporti fissiLoading the lower rack see ﬁ g Esempi di caricamentoLoading examples 4.4.2 Cutlery basket see ﬁ g 4.4.3 Upper rack vedi ﬁ g. 4-12 Loading the upper rack vedi ﬁ g EsempiLoading caricamentoexamplesAdjusting the upper rack 5 CLEANING AND USER-MAINTENANCE 5.1 General warnings and recommendationsNEVER USE ABRASIVE AND/OR CORROSIVE DETERGENTS TO CLEAN THE APPLIANCE 5.2 Cleaning the water intake ﬁlter only some models 5.3 Cleaning the spray armsRemoving the spray arms USER INSTRUCTIONS 5.4 Cleaning the ﬁlter unit 5.5 General warnings and recommendations for correct maintenance 5.6 Troubleshooting minor problems If the dishes do not come out clean, check thatProlonged disuse Before starting the dishwasher after prolonged disuseIf the dishes fail to dry or remain dull, check that If the dishes show signs of streaking, staining, etc., check thatIf there are visible traces of rust inside the tank 6 TECHNICAL DATA SEE TAB CONTENTS ContentsPage INTRODUCTION 1 INTRODUCTIONNomenclature of ﬁgures and tables Symbols used in this manual see tab 2 SAFETY INFORMATION EDGE OF THE DOOR MUST NEVER BE REMOVEDTWO PEOPLE WEARING SAFETY GLOVES ARE REQUIRED TO LIFT THE DISHWASHER REPAIR THE APPLIANCEWARNINGS 3 INSTALLATION MATERIAL INSTALLATION INSTRUCTIONSB A D C F G I L3.1 Kit supplied with dishwasher models sta4645/sta87433.2 Kit supplied with dishwasher models pla8743 DIMENSIONS OF DISHWASHER See ﬁ g 5 INSTALLATION AND HOOK-UP Only for free-standing models5.1 Leveling 5.1.1 Mounting the feet only for some models5.1.2 Levelling the appliance 5.2 Connections FIRE HAZARD DO NOT COVER OR CRUSH THE CORD PLUG5.2.1 Connecting to the water supply 5.2.1.1 Connecting to the water tap Do not cut the inlet hose see ﬁ g 5.2.1.2 Connecting the drain hose Connecting to a drain MAX 100 cm3-59/64” min O4 cmConnecting to a “T” union of the drain circuit Available from any plumbing stockistConnecting to a waste disposal unit with an air gap Connecting to the air gap no waste disposal unit Connecting to a waste disposal unit no air gap A D C B5.2.2 Electrical connections and warnings Grounding instructions5.3.1 Installation procedure all models 5.3 CommissioningINSTALLATION INSTRUCTIONS 5.3.2 Procedure for mounting the door panel Mount the door panelsee ﬁ g Secure the door to the panel with the supplied screws. The panel must have a minimum thickness of 20 mm 25/32” see ﬁ g INSTALLATION INSTRUCTIONS 5.3.3 Procedure for mounting the door panel models pla8743INSTALLATION INSTRUCTIONS INSTALLATION INSTRUCTIONS INSTALLATION INSTRUCTIONS 5.3.4 Completion of installation all models Remove the adhesive band on the gasket see ﬁ g INSTALLATION INSTRUCTIONS 5.4 Testing 19 570 0074