Smeg SCB60MFB Electronic Programmer only on Equipped Models, Clock adjustment, Automatic cooking

Page 23

Instruction for the user

8 ELECTRONIC PROGRAMMER (ONLY ON EQUIPPED MODELS)

LIST OF FUNCTIONS

MINUTE-COUNTER KEY

COOKING TIME KEY

END-OF-COOKING KEY

DECREASE TIME KEY

INCREASE TIME KEY

8.1Clock adjustment

When using the oven for the first time, or after a power failure, the display flashes regularly and

indicates . Press the keys and at the same time the keys or : each single press changes the time by 1 minute either up or down.

Before setting the programmer activate the desired function and temperature.

8.2Semiautomatic cooking

Use this setting for automatic oven switch-off at the end of cooking time.

By pressing key , the display lights up, showing ; keep the key pressed and at the same time, press keys or to set the cooking time.

Release key to start the programmed cooking time count. The display will now show the right time together with symbols A and .

8.3Automatic cooking

Use this setting to automatically start and stop the oven.

By pressing key , the display lights up showing ; keep the key pressed and at the same time, press keys or to set the cooking time.

By pressing key the sum of the right time + cooking time will appear; keep the key pressed and at the same time, press keys or to regulate the end of cooking time. Release key to start the programmed count and the display will show the right time together with symbols A and .

After set-up, to see the cooking time remaining, press the key ; to see the end of cooking time press the key . Set-up with incoherent values is logically prevented (e.g. the contrast between a cooking time and a longer period will not be accepted by the programmer).

25

Image 23
Contents Contents Instructions for Safe and Proper USE IntroductionLower the Glass Cover Slowly and by Hand Installation of the Appliance Instruction for the installerThis rating plate must never be removed Electrical connectionVentilation requirements Bottled gas connection Only on some models Connecting to natural and LPG gasAdaptation to Different Types of GAS Replacement of nozzles on the hobG30 G31 100 mm Burner and nozzle characteristics -60 cm modelsRated Burner Heating Capacity Nozzle By-pass Reduced FlowrateBy-pass Reduced Burner and nozzle characteristics cm modelsArrangement of burners on cooking hob G30/G31 GPL 90cm Oven 60cm Oven 15 mm 10 mm Adjustment of the oven burner only for gas oven modelsReplacement of the oven burner nozzle Regulation of the primary air on the oven burnerRegulation of the oven burner minimum level Final OperationsRegulation of the hob burner minimum level for natural gas Regulation of the hob burner minimum level for LPGWall fixing Mounting the rear top skirtboard where applicableDescription of Front Panel Controls Instruction for the userElectric Oven Thermostat Knob Certain Models only Lighting of the cooking hob burners Practical advice for using the cooking hob burnersUSE of the Cooking HOB 60 X Diameter of containers 60 cm modelsDiameter of containers 90 cm models How to use the electric hobs Switching on the electric hobSwitching on the electric hobs Electronic spark lighting USE of the OvenCooling system Use of the gas ovenUse of the electric grill How to use the grill Manual lighting of the gas grill burner Use of the gas grillStorage compartment Gas bottle compartment certain models onlyAutomatic cooking Clock adjustmentElectronic Programmer only on Equipped Models Semiautomatic cookingEnd of cooking Adjusting alarm volumeSwitching off the alarm Cancellation of set dataAnalogue Clock only on Equipped Models Digital Timer Certain Models onlyCleaning of cooking hob components Cleaning and MaintenanceCleaning stainless steel and enamelled versions Burner caps and flame cap crowns Cleaning of ovenDoor glass GridsRemoving the door Extraordinary MaintenanceReplacement of light bulb Lubrication of the taps and gas oven thermostat