Smeg PTSA727X manual Hob burner layout, Greasing the gas taps, Burner type

Page 12

Instructions for the Installer

5.8Hob burner layout

Burner type

1 Auxiliary

2 Semi rapid

3 Rapid

4 WOK Double flame

5 WOK

6 Rapid

7 Rapid

8 WOK Double flame

5.9Greasing the gas taps

Over time, the gas taps may become stiff or jam. Clean their insides and change their lubricating grease. This operation must be carried out by a skilled technician.

Image 12

Contents Table of contents 1. Precautions for safety and use 2. Fitting the appliance in the top7. Using the hob 8. Cleaning and maintenancePrecautions for Safety and Use 1. Precautions for safety and useInstructions for the Installer 2. Fitting the appliance in the top2.1 Fixing to the supporting structure 60 70 cm cm mod. mod A B 3. Electrical connection 3.1 Clearance above and around domestic appliances REQUIREMENTS3.2 Room ventilation 3.3 Discharge of combustion products4. GAS CONNECTION 5. Adapting to different types of gas 5.1 Removing the hob skin5.2 Adjusting for bottled gas 5.3 Adjusting for natural gasBurner ULPG - 2.75 kPa5.4 Adjusting the primary air flow 5.6 Adjusting the minimum setting for natural gas and town gas5.7 Adjusting the minimum for bottled gas 5.5 Reassembling the hob skin5.8 Hob burner layout 5.9 Greasing the gas tapsBurner type BURNER LAYOUT - Key to symbols Instructions for the User6. Description of controls 6.1 The front panel7. Using the hob 7.1 Lighting burners with safety device7.3 Practical hints for using the burners 7.2 Positioning the griddle plate7.4 Pan diameters BURNERS8. Cleaning and maintenance 8.1 Cleaning stainless steel8.2 Cleaning the components 8.1.1 Routine daily hob cleaning