Smeg ST115S User instructions, Description of the controls, Upper panel, On/Off Button

Page 10

User instructions

User instructions

3. Description of the controls

3.1 Upper panel

All the dishwasher controls are grouped on the upper panel. Switch-on, programming, switch-off etc. procedures are only possible when the door is open.

1

ON/OFF BUTTON

Pressing this button energises the appliance.

SELECTED PROGRAM INDICATOR LIGHTS

2Illumination of this light denotes the program selected and the occurrence of a fault (troubleshooting).

PROGRAM SELECTION BUTTON

3By pressing this button in sequence it is possible to select the desired program.

4

5

6

SALT WARNING LIGHT

Illumination of this light signals that salt container is empty.

RINSE AID WARNING LIGHT

Illumination of this light signals that rinse aid dispenser is empty.

HALF LOAD BUTTON

Press this button to activate the half load wash option.

HALF LOAD LIGHT

7Illumination of the light indicates selection of the HALF-LOADfunction.

9

Image 10

Contents Page Contents USES OTHER THAN THOSE DESCRIBED ABOVE Safety instructions1. Safety and operating instructions NEVER BE REMOVEDTHIS DISHWASHER MUST BE USED BY ADULTS AQUASTOP MODELS APPLIANCE2. Installation and hook-up Installation instructions2.1 Water supply connection CONNECTING TO THE WATER SUPPLY DRAIN CONNECTION2.2 Electrical connection and precautions L = brown N = blue = yellow-greenFuse replacement FOR GREAT BRITAIN ONLYSELECTED PROGRAM INDICATOR LIGHTS User instructions3. Description of the controls 3.1 Upper panelDELAYED START BUTTON SETTING THE WASHING PROGRAM AND SWITCHING ONDELAYED START LIGHTS User instructions SELECTING HALF LOAD WASH 3.2 Washing programsBefore starting a washing program make sure that available in all programs except the soak programCHANGING THE PROGRAM CANCELLING THE CURRENT PROGRAMTO SAVE ON ENERGY! … AND PROTECT THE ENVIRONMENT END OF CYCLE REMOVING THE DISHES4. Operating instructions 4.1Using the water softening systemADJUSTING THE WATER SOFTENING SYSTEM 4.2 Using the rinse aid and detergent dispensers WATER HARDNESS TABLEADJUSTING THE RINSE AID DISPENSER SETTING ADDING THE RINSE AIDADDING THE DETERGENT The market offers liquid and powder detergents with differing chemical compositions, which may contain phosphates, or be phosphate-freebut contain natural enzymes 4.3 General warnings and recommendations Items which are not dishwasher-safe LOWER BASKET 4.4 Using the basketsLOADING THE LOWER BASKET insert CUTLERY BASKETUPPER BASKET closedLOADING THE UPPER BASKET Loading examples Models with cutlery racksADJUSTING THE UPPER BASKET Version BUser instructions CLEANING THE SPRAY ARMS 5. Cleaning and maintenanceCLEANING THE WATER INTAKE FILTER 5.1General warnings and recommendations•Fill the rinse aid dispenser CLEANING THE FILTER UNITPROLONGED DISUSE Shut off the water supply tapTROUBLESHOOTING MINOR PROBLEMS If the program fails to start, check thatthere is rinse aid inside the special container Safety level 6. TroubleshootingFAULT E1 E2 E3 E4 E5 E6Alternate washing system malfunction E7 E8 E9Turbine flow-regulatormalfunction Water intake system malfunctionWidth TECHNICAL DATAWater supply pressure Electrical characteristics Height depending on models Capacity