Smeg ST115S User instructions, Using the rinse aid and detergent dispensers, Water Hardness Table

Page 18
WATER HARDNESS TABLE

User instructions

WATER HARDNESS TABLE

 

 

WATER HARDNESS

 

 

 

 

 

 

 

 

 

 

SETTING

 

German Degrees (°dH)

 

French Degrees (°dF)

 

 

 

 

 

 

 

 

 

 

 

0

- 4

0

- 7

 

Setting N. 1 NO SALT

 

 

 

 

 

5 - 15

8 - 25

 

Setting N. 1

 

 

 

 

 

 

 

 

16

- 23

26

- 40

 

Setting N. 2

 

 

 

 

 

 

 

 

24

- 31

41

- 60

 

Setting N. 3

 

 

 

 

 

 

 

 

32

- 47

61

- 80

 

Setting N. 4

 

 

 

 

 

 

48

- 58

81 - 100

 

Setting N. 5

Contact your local water board for information on the hardness of your water supply.

4.2 Using the rinse aid and detergent dispensers

The detergent and rinse aid dispensers are situated on the inner part of the door: the detergent dispenser is on the left, and the rinse aid dispenser is on the right.

With the exception of the SOAK program, before every washing cycle it is necessary to add the required amount of detergent to the detergent dispenser. The rinse aid, on the other hand, should only be added as required.

17

Image 18
Contents Page Contents USES OTHER THAN THOSE DESCRIBED ABOVE Safety instructions1. Safety and operating instructions NEVER BE REMOVEDTHIS DISHWASHER MUST BE USED BY ADULTS AQUASTOP MODELS APPLIANCEInstallation instructions 2. Installation and hook-up2.1 Water supply connection CONNECTING TO THE WATER SUPPLY DRAIN CONNECTION2.2 Electrical connection and precautions L = brown N = blue = yellow-greenFuse replacement FOR GREAT BRITAIN ONLYSELECTED PROGRAM INDICATOR LIGHTS User instructions3. Description of the controls 3.1 Upper panelSETTING THE WASHING PROGRAM AND SWITCHING ON DELAYED START BUTTONDELAYED START LIGHTS User instructions SELECTING HALF LOAD WASH 3.2 Washing programsBefore starting a washing program make sure that available in all programs except the soak programCANCELLING THE CURRENT PROGRAM CHANGING THE PROGRAMTO SAVE ON ENERGY! … AND PROTECT THE ENVIRONMENT END OF CYCLE REMOVING THE DISHES4. Operating instructions 4.1Using the water softening systemADJUSTING THE WATER SOFTENING SYSTEM 4.2 Using the rinse aid and detergent dispensers WATER HARDNESS TABLEADJUSTING THE RINSE AID DISPENSER SETTING ADDING THE RINSE AIDADDING THE DETERGENT The market offers liquid and powder detergents with differing chemical compositions, which may contain phosphates, or be phosphate-freebut contain natural enzymes 4.3 General warnings and recommendations Items which are not dishwasher-safe 4.4 Using the baskets LOWER BASKETLOADING THE LOWER BASKET insert CUTLERY BASKETUPPER BASKET closedLOADING THE UPPER BASKET Loading examples Models with cutlery racksADJUSTING THE UPPER BASKET Version BUser instructions CLEANING THE SPRAY ARMS 5. Cleaning and maintenanceCLEANING THE WATER INTAKE FILTER 5.1General warnings and recommendations•Fill the rinse aid dispenser CLEANING THE FILTER UNITPROLONGED DISUSE Shut off the water supply tapTROUBLESHOOTING MINOR PROBLEMS If the program fails to start, check thatthere is rinse aid inside the special container Safety level 6. TroubleshootingFAULT E1 E2 E3 E4 E5 E6Alternate washing system malfunction E7 E8 E9Turbine flow-regulatormalfunction Water intake system malfunctionWidth TECHNICAL DATAWater supply pressure Electrical characteristics Height depending on models Capacity