Smeg ST0904 instruction manual General warnings and recommendations, Products

Page 23

User instructions

"3/1" Products

If you wish to use detergents which already contain salt and rinse aid, check whether your dishwasher is fitted with the "3/1 option button" on the "Controls description" page and then refer to the section which explains how to use this function.

If the button is not provided, we recommend the use of conventional products (separate detergent, salt and rinse aid), because with conventional washing cycles "3/1" products might create problems such as a white deposit, poor drying results and residues left on dishes.

The introduction of detergent into the rinse aid dispenser, even in liquid form, will damage the dishwasher.

4.3 General warnings and recommendations

Before using the dishwasher for the first time, it is advisable to read the following recommendations concerning dish types to be washed and their loading.

There are generally no constraints on the washing of domestic dishes, but in certain cases it is necessary to take their characteristics into account.

Before loading the dishes into the baskets it is necessary to:

remove coarse food remains: e.g. bones, fish-bones, etc. which may clog the filter or damage the wash pump.

soak pots and pans with burnt food residues in the bottom for easier removal.

There is no need to pre-wash the dishes under running water before loading them into the baskets since this only wastes water.

Correct loading of the dishes helps ensure optimal washing results.

58

Image 23
Contents Dishwasher Contents Safety and operating instructions Safety instructionsSafety instructions Aquastop Models Installation and hook-up Installation instructionsDrain Connection Electrical connection and precautionsWater supply connection If the Appliance is Provided with a Plugless Supply Cord When Cleaning and Maintaining the ApplianceFor UK only Fuse replacementUpper panel Description of the controlsWASH-ZONE Button Program Delay ButtonOption Button Option LightProgramme Consumption Table for Certification Bodies Cancelling the Current ProgramWashing programs Extra Programs Changing the ProgramTo Save on ENERGY! … and Protect the Environment Water Hardness Table Adjusting the Water Softening SystemRemoving the Dishes END of CycleOperating instructions Using the water softening systemUsing the rinse aid and detergent dispensers Adding the Rinse AID Adjusting the Rinse AID Dispenser SettingAdding the Detergent Products General warnings and recommendationsUser instructions Using the baskets User instructions Cutlery Basket Cleaning the Spray Arms Cleaning and maintenanceCleaning the Water Intake Filter Cleaning the Filter Unit General Warnings and Recommendations for Correct Maintenance If the dishes are not being cleaned properly, check that Fault Description TroubleshootingWater intake system malfunction Technical Data Min ,2 max ,2 kg