Smeg ST0904 instruction manual Technical Data

Page 34

User instructions

TECHNICAL DATA

Width

Depth measured flush with the outer edge of the control panel

Height

Capacity

Water supply pressure

Electrical characteristics

858mm

550mm

580 mm

12 Standard place settings

min. 0,05 - max. 0,9 MPa (min. 0.5 – max. 9 bar)

See rating plate

69

Image 34

Contents Dishwasher Contents Safety instructions Safety and operating instructionsSafety instructions Aquastop Models Installation instructions Installation and hook-upWater supply connection Electrical connection and precautionsDrain Connection When Cleaning and Maintaining the Appliance If the Appliance is Provided with a Plugless Supply CordFuse replacement For UK onlyDescription of the controls Upper panelOption Light Program Delay ButtonOption Button WASH-ZONE ButtonProgramme Consumption Washing programs Cancelling the Current ProgramTable for Certification Bodies Changing the Program Extra ProgramsTo Save on ENERGY! … and Protect the Environment Adjusting the Water Softening System Water Hardness TableEND of Cycle Removing the DishesUsing the water softening system Operating instructionsUsing the rinse aid and detergent dispensers Adjusting the Rinse AID Dispenser Setting Adding the Rinse AIDAdding the Detergent General warnings and recommendations ProductsUser instructions Using the baskets User instructions Cutlery Basket Cleaning the Water Intake Filter Cleaning and maintenanceCleaning the Spray Arms Cleaning the Filter Unit General Warnings and Recommendations for Correct Maintenance If the dishes are not being cleaned properly, check that Troubleshooting Fault DescriptionWater intake system malfunction Technical Data Min ,2 max ,2 kg