Smeg ST0904 instruction manual Cleaning the Filter Unit

Page 29

User instructions

To remove the upper spray arms, unsrew the looking ring. Wash them under running water and carefully replace them in their seats, checking that their rotary movement is in no way impeded.

CLEANING THE FILTER UNIT

It is advisable to periodically inspect the centre filter C and, if necessary, to clean it. To remove the filter, grip the tabs, turn them anticlockwise and lift upwards;

push the centre filter D from the underside to remove it from the micro-filter:

separate the two parts which make up the plastic filter by pressing the body of the filter in the zone shown by the arrows;

remove the centre filter by lifting it upwards.

64

Image 29
Contents Dishwasher Contents Safety and operating instructions Safety instructionsSafety instructions Aquastop Models Installation and hook-up Installation instructionsDrain Connection Electrical connection and precautionsWater supply connection If the Appliance is Provided with a Plugless Supply Cord When Cleaning and Maintaining the ApplianceFor UK only Fuse replacementUpper panel Description of the controlsOption Button Program Delay ButtonOption Light WASH-ZONE ButtonProgramme Consumption Table for Certification Bodies Cancelling the Current ProgramWashing programs Extra Programs Changing the ProgramTo Save on ENERGY! … and Protect the Environment Water Hardness Table Adjusting the Water Softening SystemRemoving the Dishes END of CycleOperating instructions Using the water softening systemUsing the rinse aid and detergent dispensers Adding the Rinse AID Adjusting the Rinse AID Dispenser SettingAdding the Detergent Products General warnings and recommendationsUser instructions Using the baskets User instructions Cutlery Basket Cleaning the Spray Arms Cleaning and maintenanceCleaning the Water Intake Filter Cleaning the Filter Unit General Warnings and Recommendations for Correct Maintenance If the dishes are not being cleaned properly, check that Fault Description TroubleshootingWater intake system malfunction Technical Data Min ,2 max ,2 kg