Smeg ER12150NL, ER12150EU, ER12550EU, ER12150PP, ER12550NL Plate on the Casing Must not be Removed

Page 3

Introduction

THE IDENTIFICATION PLATE, WITH TECHNICAL DATA, SERIAL NUMBER AND MARKING IS CLEARLY VISIBLE UNDER THE CASING.

THE PLATE ON THE CASING MUST NOT BE REMOVED.

BEFORE CONNECTING THE DEVICE, MAKE SURE THAT IT HAS BEEN REGULATED FOR THE TYPE OF GAS THAT WILL FEED IT, CHECKING THE LABEL UNDER THE CASING.

DO NOT PUT PANS WITHOUT PERFECTLY SMOOTH AND FLAT BOTTOMS ON THE COOKING HOB GRIDS.

DO NOT USE RECIPIENTS OR GRIDDLE PLATES THAT EXTEND BEYOND THE EXTERNAL PERIMETER OF THE HOB.

THE HOB IS TO BE USED BY ADULTS ONLY. DO NOT LET UNSUPERVISED CHILDREN PLAY WITH THE HOB.

REPLACED APPLIANCES MUST BE TAKEN TO A SPECIAL GARBAGE COLLECTION CENTRE.

The manufacturer declines all responsibility for damage to persons or things caused by non-observance of the above prescriptions or by interference with any part of the appliance or by the use of non-original spares.

20

Image 3
Contents Contents Instructions for Safe and Proper USE IntroductionPlate on the Casing Must not be Removed Positioning of HOB Instructions for the installerElectrical Connection GAS Connection Connection to LPG Ventilation of roomsDischarge of combustion products Removing the hob Adaptation to Different Types of GASCapacity Regulation for LPGRegulation of primary air Regulation for natural gasFinal Operations Regulation of minimum for natural gasRegulation of minimum for LPG Lubrication of gas taps Arrangement of burners on hobInstructions for the user Using the HOBIgnition of the burners with safety device Practical advice for using the burnersCleaning and Maintenance CleaningDiameter of containers Ignition plugs and safety devices Cleaning of cooking hob components