Smeg ER12150EU, ER12550EU Cleaning of cooking hob components, Ignition plugs and safety devices

Page 15

Instructions for the user

8.2 Cleaning of cooking hob components

Grids, caps, flame cap crowns and burners can be removed for ease of cleaning. Wash them in warm water using a non-abrasive detergent, taking care to remove all tough spots. Before remounting, allow the components to fully dry out.

8.2.1 Ignition plugs and safety devices

For good functioning of the lighting ignition plugs and the safety devices, keep them very clean.

Check frequently and clean with a damp cloth when necessary.

Image 15

Contents Contents Instructions for Safe and Proper USE IntroductionPlate on the Casing Must not be Removed Positioning of HOB Instructions for the installerElectrical Connection GAS Connection Connection to LPG Ventilation of roomsDischarge of combustion products Removing the hob Adaptation to Different Types of GASCapacity Regulation for LPGRegulation of primary air Regulation for natural gasFinal Operations Regulation of minimum for natural gasRegulation of minimum for LPG Lubrication of gas taps Arrangement of burners on hobInstructions for the user Using the HOBIgnition of the burners with safety device Practical advice for using the burnersCleaning and Maintenance CleaningDiameter of containers Ignition plugs and safety devices Cleaning of cooking hob components