User instructions
END OF PROGRAM
At the end of the program the beeper sounds briefly and the program lights 4 and 5 (marked "end") flash.
INTERRUPTION A PROGRAM
To interrupt a program in progress:
•press the START/PAUSE button (2); the light of the program in progress remains on (confirmation beep);
•you may now restart the program by pressing button (2) again until it
restarts, or change or annul the program (see "CHANGING A PROGRAM", or "ANNULLING A PROGRAM").
CHANGING A PROGRAM
To change the running program it is necessary:
•to interrupt the running program (see “INTERRUPTION A PROGRAM”);
•select the new program;
•start the program (see “STARTING THE PROGRAM”).
ANNULLING A PROGRAM
To annul the program, keep the START/PAUSE button (2) pressed until the program is interrupted (light on and confirmation beep).
Press button (2) again and keep it pressed until the lights 4 and 5 (marked "end") come on.
The water in the tank will be pumped out and the program will end at the point where it was interrupted.
12