Smeg PL115NE, PL115X instruction manual User instructions, Adding The Detergent

Page 20
ADDING THE DETERGENT

User instructions

ADDING THE DETERGENT

To open the detergent dispenser cap, lightly press the button P. Add the detergent and close the cap carefully.

During the washing cycle, the dispenser will be opened automatically.

When a program with hot prewash is selected (see program table), extra detergent must be placed in the cavity G/H (depending on models).

Use only detergents specially formulated for dishwashers. For optimal washing results it is important to use a good quality detergent.

The detergent packs must be sealed and stored in a dry place to prevent the formation of lumps which may negatively affect washing results. Once opened the detergent packs should not be kept for too long, otherwise the detergent loses its effectiveness.

Do not use detergents formulated for washing dishes by hand, because they produce a great deal of foam and may negatively affect the operation of the dishwasher.

Add the correct amount of detergent. An insufficient amount of detergent will result in a partial removal of dirt from the dishes, whereas an excessive amount is wasteful and does not improve the washing results.

19

Image 20
Contents GUIDE FOR USING THE DISHWASHER AND THE WASHING PROGRAMS Contents Safety instructions 1. Safety and operating instructionsTHIS DISHWASHER MUST BE USED BY ADULTS AQUASTOP MODELS For free-standing models only Installation instructions2. Installation and hook-up DRAIN CONNECTION CONNECTING TO THE WATER SUPPLY2.1 Water supply connection 2.2 Electrical connection and precautions IF THE APPLIANCE IS PROVIDED WITH A PLUGLESS SUPPLY CORDFuse replacement FOR GREAT BRITAIN ONLYUser instructions 3. Description of the controls3.1 Front panel 1 ON/OFF BUTTON 2 START/PAUSE BUTTON 3 SELECTION PROGRAMS BUTTONSETTING THE WASHING PROGRAM SWITCHING ON 3.2 Washing programsBefore starting a washing program make sure that The correct amount of detergent has been added to the dispenserEND OF PROGRAM INTERRUPTION A PROGRAMCHANGING A PROGRAM ANNULLING A PROGRAMDELAYING THE PROGRAM presente solamente su alcuni modelli disponibile in tutti i programmi escluso lammolloREMOVING THE DISHES TO SAVE ON ENERGY! … AND PROTECT THE ENVIRONMENTTO CUT DOWN ON DETERGENT CONSUMPTION! … AND PROTECT THE ENVIRONMENT 4. Operating instructions 4.1 Using the water softening systemADJUSTING THE WATER SOFTENING SYSTEM 4.2 Using the rinse aid and detergent dispensers WATER HARDNESS TABLEADJUSTING THE RINSE AID DISPENSER SETTING ADDING THE RINSE AIDADDING THE DETERGENT During the washing cycle, the dispenser will be opened automaticallyUser instructions MAKE SURE that the items being washed are dishwasher-safe 4.3 General warnings and recommendationsCorrect loading of the dishes helps ensure optimal washing results Items which are not dishwasher-safe Dishes and objects in copper, tin, zinc or brass these tend to stainLOADING THE LOWER BASKET 4.4 Using the basketsLOWER BASKET CUTLERY BASKET UPPER BASKETLOADING THE UPPER BASKET Loading examples Models with cutlery racksADJUSTING THE UPPER BASKET Version BUser instructions 5. Cleaning and maintenance CLEANING THE WATER INTAKE FILTERCLEANING THE SPRAY ARMS 5.1 General warnings and recommendationsCLEANING THE FILTER UNIT GENERAL WARNINGS AND RECOMMENDATIONS FOR CORRECT MAINTENANCEPROLONGED DISUSE Fill the rinse aid dispenser Shut off the water supply tapTROUBLESHOOTING MINOR PROBLEMS If the dishes are not being cleaned properly, check thatBEFORE STARTING THE DISHWASHER AFTER PROLONGED DISUSE Reconnect the water intake hose and open the tap againIf there are visible traces of rust inside the tank If the dishes fail to dry or remain dull, check thatIf the dishes show signs of streaking, staining, etc., check that 6. Troubleshooting E1 E2 E3 E4 E5 E6the program and switch off the dishwasher Switch the dishwasher back on, program itproblem persists, contact the after-sales serviceTECHNICAL DATA Electrical characteristicsWidth Height depending on models Capacity Water supply pressuremollelaterali primadell’installazione des ressortslateraux avant l’installationMontare la porta e regolarelatensione delle einstellen