Smeg PL115X, PL115NE instruction manual Troubleshooting, User instructions, E1 E2 E3 E4 E5 E6

Page 33

E1

E2

E3

E4

E5

E6

32

User instructions

6. Troubleshooting

The dishwasher is capable of signalling a number of faults through the simultaneous illumination of several indicator lights, with the following meanings:

FAULT	DESCRIPTION

	Acquastop failure
	The anti-flooding system has been activated.
	The system is tripped in case of water leaks.
	Contact the after-sales service.

	Safety level
	The system which limits the water level inside
	the dishwasher has been tripped. Interrupt the
	program and switch off the dishwasher. Switch
	the dishwasher back on, program it again and
	start the washing cycle. If the problem persists,
	contact the after-sales service.

	Water heating malfunction
	The water is not heated or the heating
	parameters are not correct. Repeat the
	washing program; if the problem persists,
	contact the after-sales service.

	Water temperature monitoring malfunction
	Interrupt the program and switch off the
	dishwasher. Switch the dishwasher back on,
	program it again and start the washing cycle. If
	the problem persists, contact the after-sales
	service.

	Water intake malfunction
	The appliance does not take in water or does
	not do so correctly. Check that the water
	connections are correct, the water intake tap is
	turned on and the filter is not fouled. If the
	problem persists, contact the after-sales
	service.

	Water pump-out malfunction
	The appliance does not pump out the water or
	does not do so correctly. Check that the drain
	hose is not kinked or crushed and that the
	siphon and filter are not fouled. If the problem
	persists, contact the after-sales service.

Image 33

Contents GUIDE FOR USING THE DISHWASHER AND THE WASHING PROGRAMS Contents 1. Safety and operating instructions Safety instructionsTHIS DISHWASHER MUST BE USED BY ADULTS AQUASTOP MODELS Installation instructions 2. Installation and hook-upFor free-standing models only CONNECTING TO THE WATER SUPPLY 2.1 Water supply connectionDRAIN CONNECTION IF THE APPLIANCE IS PROVIDED WITH A PLUGLESS SUPPLY CORD 2.2 Electrical connection and precautionsFOR GREAT BRITAIN ONLY Fuse replacement3. Description of the controls User instructions3.1 Front panel 1 ON/OFF BUTTON 2 START/PAUSE BUTTON 3 SELECTION PROGRAMS BUTTONSETTING THE WASHING PROGRAM 3.2 Washing programs SWITCHING ONBefore starting a washing program make sure that The correct amount of detergent has been added to the dispenserINTERRUPTION A PROGRAM END OF PROGRAMCHANGING A PROGRAM ANNULLING A PROGRAMdisponibile in tutti i programmi escluso lammollo DELAYING THE PROGRAM presente solamente su alcuni modelliTO SAVE ON ENERGY! … AND PROTECT THE ENVIRONMENT TO CUT DOWN ON DETERGENT CONSUMPTION! … AND PROTECT THE ENVIRONMENTREMOVING THE DISHES 4.1 Using the water softening system 4. Operating instructionsADJUSTING THE WATER SOFTENING SYSTEM WATER HARDNESS TABLE 4.2 Using the rinse aid and detergent dispensersADDING THE RINSE AID ADJUSTING THE RINSE AID DISPENSER SETTINGDuring the washing cycle, the dispenser will be opened automatically ADDING THE DETERGENTUser instructions 4.3 General warnings and recommendations Correct loading of the dishes helps ensure optimal washing resultsMAKE SURE that the items being washed are dishwasher-safe Dishes and objects in copper, tin, zinc or brass these tend to stain Items which are not dishwasher-safe4.4 Using the baskets LOWER BASKETLOADING THE LOWER BASKET UPPER BASKET CUTLERY BASKETLoading examples Models with cutlery racks LOADING THE UPPER BASKETVersion B ADJUSTING THE UPPER BASKETUser instructions CLEANING THE WATER INTAKE FILTER 5. Cleaning and maintenanceCLEANING THE SPRAY ARMS 5.1 General warnings and recommendationsGENERAL WARNINGS AND RECOMMENDATIONS FOR CORRECT MAINTENANCE CLEANING THE FILTER UNITPROLONGED DISUSE Fill the rinse aid dispenser Shut off the water supply tapIf the dishes are not being cleaned properly, check that TROUBLESHOOTING MINOR PROBLEMSBEFORE STARTING THE DISHWASHER AFTER PROLONGED DISUSE Reconnect the water intake hose and open the tap againIf the dishes fail to dry or remain dull, check that If the dishes show signs of streaking, staining, etc., check thatIf there are visible traces of rust inside the tank E1 E2 E3 E4 E5 E6 6. TroubleshootingSwitch the dishwasher back on, program it the program and switch off the dishwasherproblem persists, contact the after-sales serviceElectrical characteristics TECHNICAL DATAWidth Height depending on models Capacity Water supply pressuredes ressortslateraux avant l’installation mollelaterali primadell’installazioneMontare la porta e regolarelatensione delle einstellen