Smeg PL115X, PL115NE instruction manual User instructions, Setting The Washing Program

User instructions

SETTING THE WASHING PROGRAM

To select the most suitable program for the dishes to be washed refer to the table below, which indicates the most appropriate program according to dish type and degree of soiling.

PROGRAM SELECTION

SOAK

LIGHT

BIO

(*)

NORMAL

ULTRA

CLEAN

TYPE AND GRADE DIRT	PROGRESS	DURATION	CONSUMPTION
	PROGRAM	MINUTES	WATER	POWER
		(2)	LITRES (1)	KWh (2)
PANS AND DISHES	Cold prewash	15'	6	0,03
AWAITING COMPLETION
OF THE LOAD
	Wash at 45°C
DELICATE DISHES	Cold rinse	70'	15	1,15
WITH LIGHT DIRT	Rinse at 70°C
	Dry
DISHES WITH	Cold prewash
	Wash at 50°C	180'	**	**
NORMAL DIRT, EVEN	Rinse at 64°C
WITH DRIED-ON RESIDUES
	Dry
PANS AND DISHES	Cold prewash
	Wash at 65°C
WITH NORMAL DIRT,	Cold rinse	100'	20	1,40
EVEN WITH DRIED-ON
RESIDUES	Rinse at 70°C
	Dry
	Prewash at 45°C
	Wash at 70°C
VERY DIRTY PANS
AND DISHES, EVEN	2 cold rinses	115'	24	1,77
WITH DRIED-ON RESIDUES	Rinse at 70°C

Dry

Only run the soak program with half loads.

The HALF LOAD OPTION (5) and DELAYED START (7) options cannot be used with the soak program.

(*)Reference program as per EN 50242 standard

(**)See energy label

(1)Average power consumption with the softener set on level 2.

(2)The cycle duration and power consumption may vary according to the water and room

temperatures, and the type and amount of dishes.

The ULTRA CLEAN program terminate with an extra anti-bacteria rinse that ensures a further reduction in the bacteria level. If the temperature falls during this stage of the program (e.g. because the door is opened or due to a power blackout), the program lights (2) flash to warn that the anti-bacteria effect is not guaranteed.

The washing cycle will not take place if the dishwasher door is left open or not properly closed.

10