HP T2500 manual Change the graphic language setting, Manage printer security

To configure the same network settings from the front panel, press , then , then Connectivity >

Network connectivity > Gigabit Ethernet > Modify configuration.

You have various other options available from the Connectivity > Network connectivity > Advanced menu.

●Allow SNMP: Specify whether SNMP is permitted.

●Embedded Web Server > Allow EWS: Specify whether the Embedded Web Server is enabled.

●Web Services > HP Utility software: Enable or disable the HP Utility.

●Web Services > Color and paper management: View the color and paper management settings.

●Restore factory settings: restore the initial default values of the network settings.

Change the graphic language setting

You can change the graphic language setting by launching the Embedded Web Server from the HP Utility with the following steps.

1.Under Windows, select the Admin tab, then Printer settings > Printing preferences.

Under Mac OS X, select Configuration then Printer settings > Configure printer settings > Printing preferences.

2.Select one of the following options.

●Select Automatic to let the printer determine which type of file it is receiving. This is the default setting; it works for most software applications. You should not normally need to change it.

●Select HP-GL/2only if you are sending a file of that type directly to the printer, without going through a printer driver.

●Select PDF only if you are sending a file of that type directly to the printer, without going through a printer driver (PostScript printers only).

●Select PostScript only if you are sending a file of that type directly to the printer, without going through a printer driver (PostScript printers only).

●Select TIFF only if you are sending a file of that type directly to the printer, without going through a printer driver (PostScript printers only).

●Select JPEG only if you are sending a file of that type directly to the printer, without going through a printer driver (PostScript printers only).

Alternatively, you can change the graphic language setting from the front panel. Press , then ,

then Setup > Printing preferences > Graphics language. Select the desired option.

NOTE: If the graphic language is set from the Embedded Web Server, it overrides the front panel setting.

Manage printer security

When you have set up Web Services, the printer is in unlock mode. In unlock mode, anyone who knows your printer's email address can print to your printer by just sending a file to it. Although HP provides a spam filtering service, you should be careful about giving out your printer's email address, as everything sent to that address may be printed on your printer.

If you are the printer administrator, you can manage printer security or change your printer status to lock mode by visiting the HP ePrint Center at http://www.hp.com/go/eprintcenter. You can also manage print jobs from there. At your first visit, you will need to create an account in the HP ePrint Center.

48 Chapter 5 Personalizing the printer ENWW