Edges of objects are stepped or not sharp

If edges of objects or lines appear to be poorly defined or lighter in density, and you have already set the print-quality slider to Quality in the driver dialog, select the custom print-quality options, and try setting the quality level to Normal. See Printing on page 68.

Edges of objects are darker than expected

If edges of objects seem darker than expected, and you have already set the print-quality slider to Quality in the driver dialog, select the custom print-quality options, and try setting the quality level to Normal. See Printing on page 68.

Horizontal lines at the end of a cut sheet print

This type of defect affects only the end of a print, within approximately 30 mm of the trailing edge of the paper. You may see some very thin horizontal lines across the print.

To avoid this problem:

1.Print the Image Diagnostics Print. See The Image Diagnostics Print on page 196.

2.Consider printing with roll paper.

3.Consider using larger margins around your image.

Vertical bands of different colors

If your print has vertical bands of different colors along it:

1.Try using higher print-quality settings (see Printing on page 68). For instance, if you have set the Print Quality slider to Speed, try setting it to Quality.

2.Try using thicker paper, choosing from the recommended paper types such as HP Heavyweight Coated Paper and HP Super Heavyweight Paper. See Order paper on page 167.

ENWW

Edges of objects are stepped or not sharp 193