5.The default scan settings are displayed, and you can change them by pressing the Settings button.

NOTE: You can change the default settings from the front panel.

6.When you are ready to scan, press the Start button.

7.If you have not already done so, feed the document into the scanner as shown, centered and facing up.

8.When the scan is complete, the scan results are displayed. You can press the event name or the file name to change it; you can press the magnifying glass icon to preview the scan.

NOTE: The file name must end with .pdf.

If all is well and the scanned file is within your quota, press the Next button to continue. If the file exceeds your quota, or if the preview looks wrong, you can press Scan again to change the scan settings and try again.

ENWW

Scan to an email address 99

Page 109
Image 109
HP T2500 manual Enww