HP T2500 manual Insert the printhead, Lift the printhead out of the carriage

9.Lift the printhead out of the carriage.

Insert the printhead

NOTE: You cannot insert a new printhead successfully if a connected ink cartridge has not enough ink to complete the printhead replacement process. In this case, you should replace the ink cartridge before inserting the new printhead. You can use the old cartridge later if it still contains some ink.

1.Insert the new printhead.

CAUTION: Insert the printhead slowly and vertically, straight down. It may be damaged if you insert it too fast, or at an angle, or if you rotate it as you insert it.

2.Check that the printhead is correctly aligned with its ink connectors.

148 Chapter 16 Handling ink cartridges and printhead ENWW