Menu item

Sub-menu item

Sub-menu item

Values and Description

 

 

 

 

 

 

DHCPV6 Policy

Router Specified: The stateful auto-configuration method

 

 

 

to be used by the print server is determined by a router.

 

 

 

The router specifies whether the print server obtains its

 

 

 

address, its configuration information, or both from a

 

 

 

DHCPv6 server.

 

 

 

Router Unavailable: If a router is not available, the print

 

 

 

server should attempt to obtain its stateful configuration

 

 

 

from a DHCPv6 server.

 

 

 

Always: Whether or not a router is available, the print

 

 

 

server always attempts to obtain its stateful

 

 

 

configuration from a DHCPv6 server.

 

 

 

 

 

 

Primary DNS

Use this item to specify an IPv6 address for a primary DNS

 

 

 

server that the print server should use.

 

 

 

NOTE: This item will appear only if Manual

 

 

 

configuration is a higher priority than DHCP in the Config

 

 

 

Precedence table, configured through the embedded

 

 

 

Web server.

 

 

 

 

 

 

Secondary DNS

Use this item to specify an IPv6 address for a secondary

 

 

 

DNS server that the print server should use.

 

 

 

NOTE: This item will appear only if Manual

 

 

 

configuration is a higher priority than DHCP in the Config

 

 

 

Precedence table, configured through the embedded

 

 

 

Web server.

 

 

 

 

 

Proxy Server

 

Specifies the proxy server to be used by embedded

 

 

 

applications in the device. A proxy server is typically used

 

 

 

by network clients for Internet access. It caches Web

 

 

 

pages, and provides a degree of Internet security, for

 

 

 

those clients.

 

 

 

To specify a proxy server, enter its IPv4 address or fully-

 

 

 

qualified domain name. The name can be up to 255

 

 

 

octets.

 

 

 

For some networks, you may need to contact your

 

 

 

Independent Service Provider (ISP) for the proxy server

 

 

 

address.

 

 

 

 

 

Proxy Port

 

Type the port number used by the proxy server for client

 

 

 

support. The port number identifies the port reserved for

 

 

 

proxy activity on your network, and can be a value from 0

 

 

 

to 65535.

 

 

 

 

Security

Print Sec Page

 

Yes: Prints a page that contains the current IPsec security

 

 

 

settings on the HP Jetdirect print server.

 

 

 

No (default): A security settings page is not printed.

 

 

 

 

Secure Web

 

 

For configuration management, specify whether the

 

 

 

embedded Web server will accept communications using

 

 

 

HTTPS (Secure HTTP) only, or both HTTP and HTTPS.

 

 

 

HTTPS Required: For secure, encrypted communications,

 

 

 

only HTTPS access is accepted. The print server will

 

 

 

appear as a secure site.

 

 

 

HTTP/HTTPS optional: Access using either HTTP or HTTPS

 

 

 

is permitted.

 

 

 

NOTE: The factory default setting depends on the print

 

 

 

server model.

 

 

 

 

ENWW

Front-panel menu items 41