HP T2500 Pause a job in the queue, Reprint a job from the queue, Delete a job from the queue

If nesting is turned on, the prioritized job may still be nested with others. If you really want this job to be printed next, and not nested with others, first turn nesting off and then move it to the front of the queue as described above.

In the following cases, the Move to front button is not displayed:

●The job is already at the front of the queue.

●The job is on hold—in this case the Force print button is displayed instead.

●The job has finished—in this case the Print button is displayed instead.

●The job has some error condition.

Pause a job in the queue

If you select the job in the queue that is currently printing, you will see a Pause button, which you can press to pause printing. The Pause button then changes to a Force print button, which you can press to resume printing.

Reprint a job from the queue

To reprint an already-printed job, select the job from the queue, then select Print.

When reprinting a print job, you cannot change the print settings, because the job has already been rasterized.

Save a scanned job to another destination

From the scan queue, select the job, and save to. There you will be able to save the scanned job to another destination.

Delete a job from the queue

Under normal circumstances, there is no need to delete a job from the queue after printing it, as it will just fall off the end of the queue as more files are sent. However, if you have sent a file in error, and want to avoid printing it, you can simply select the job and then press Delete.

NOTE: If an administrator password has been set, it will be required.

In the same way, you can delete a job that has not been printed yet.

If the job is currently being printed (its status is printing), you can press Cancel and then Delete.

Delete all jobs

To delete all jobs in a queue, press the Delete icon at the top right of the job queue screen, and then press Delete all Print & Copy jobs or Delete all Scan jobs.

NOTE: If an administrator password has been set, it will be required.

Turn off the job queue

To turn off the job queue, press , then , then Setup > Job management > Queue > Off.

ENWW The job queue in the front panel 105