HP T2500 manual Print from iOS with AirPrint, 1Recommended settings for unattended printing

●Check the ink levels remaining in your ink cartridges.

●When you have submitted your print jobs, you can use the Embedded Web Server from a remote location to monitor their status.

●Drying time should be set to Optimal.

●Press , then , then Setup > Printing preferences > Paper options > Roll switching options > Minimize roll changes or Use roll with less paper.

We recommend the following settings, depending on the paper type and what kind of prints you are making.

Table 8-1Recommended settings for unattended printing

Print type	Print mode	MaxDetail	Drying time	Paper types
Lines	Normal	Off	Optimal	Coated, Bond,
				Heavyweight Coated,
				Photo
Lines and fills	Normal	On	Optimal	Coated, Bond,
				Heavyweight Coated,
				Photo
Maps	Best	On	Optimal	Coated, Heavyweight
				Coated, Photo
Renderings,	Best	On	Optimal	Coated, Heavyweight
photographs				Coated, Photo

Print from iOS with AirPrint

You can print using AirPrint without needing a printer driver, bearing in mind the following points.

●Ensure that Airprint is enabled: go to the printer’s front panel and press , then , then Setup > Connectivity > AirPrint connectivity > AirPrint.

●Your AirPrint device must be in the same segment of the same local network as the printer. When using Wi-Fi, the Wi-Fi network must be bridged to the wired network used by the printer (as is the case with most home or small-office routers).

●To identify the right printer from your AirPrint device, go to the printer's front panel, press , then

, and make a note of the Bonjour/AirPrint name.

●Many iPhone apps may not be able to print pages larger than A4 or US Letter size. Please check with the app developer.

●If you cannot print from the app you are using, try printing from another app.

82 Chapter 8 Printing ENWW