System Profile Settings Screen, System Security Screen

Menu Item	Description
Remote Terminal	Allows you to set the remote console terminal type. By default, the Remote
Type	Terminal Type option is set to VT 100/VT 220.
Redirection After	Allows you to enable or disable to the BIOS console redirection when the
Boot	operating system is loaded. By default, the Redirection After Boot option is set to
	Enabled.

System Profile Settings Screen

Menu Item	Description
System Profile	Allows you to set the system profile. If you set the System Profile option to a mode
	other than Custom, the BIOS automatically sets the rest of the options. You can
	only change the rest of the options if the mode is set to Custom. By default, the
	System Profile option is set to Performance Per Watt Optimized (OS).
	NOTE: The following parameters are available only when the System Profile is
	set to Custom.
CPU Power	Allows you to set the CPU power management. By default, the CPU Power
Management	Management option is set to System OS DBPM. DBPM is Demand-Based Power
	Management.
Memory	Allows you to set the memory frequency. By default, the Memory Frequency
Frequency	option is set to Maximum Performance.
Turbo Boost	Allows you to enable or disable the processor to operate in turbo boost mode. By
	default, the Turbo Boost option is set to Enabled.
C1E	Allows you to enable or disable the processor to switch to a minimum
	performance state when it is idle. By default, the C1E option is set to Enabled.
C States	Allows you to enable or disable the processor to operate in all available power
	states. By default, the C States option is set to Enabled.
Memory Refresh	Allows you to set the memory refresh rate. By default, the Memory Refresh Rate
Rate	option is set to 1x.

Menu Item	Description
Intel(R) AES-NI	The Intel(R) AES-NI option improves the speed of applications by performing
	encryption and decryption using the Advanced Encryption Standard Instruction Set
	and is set to Enabled by default.
System Password	Allows you to set the system password. This option is read-only if the password
	jumper is not installed in the system.
Setup Password	Allows you to set the setup password. This option is read-only if the password
	jumper is not installed in the system.
Password Status	Allows you to lock the system password. By default, the Password Status option is
	set to Unlocked.