User instructions
3.2 Washing programs
Before starting a washing program make sure that:
•The water supply tap is open.
•The correct amount of detergent has been added to the dispenser.
•The baskets have been correctly loaded.
•The spray arms are able to rotate freely and without obstruction.
•The dishwasher door is securely closed.
RAPID CYCLES (available in all programs except the soak program)
The rapid cycles option cuts the program duration but generates a slight increase in water and electricity consumption. To activate this option, press button (6) (light 7 comes on) after selecting the program required; the option is automatically deactivated at the end of the program.
"3/1" OPTION BUTTON (on some models only) (available in all programs except the soak program)
Pressing this button (8) activates the "3/1" option; the relative light comes on to confirm the selection.
This option is specifically for the use of tablet or powder detergents which already contain salt and rinse aid. If you decide to use a product of this kind, press the button to allow the dishwasher to vary the necessary parameters to ensure the best washing results by making full use of the quantities of detergent, salt and rinse aid these special products contain. At the end of the cycle, the appliance automatically presets for the use of conventional products.
13