Smeg STA643PQ manual User instructions

Page 31
Manual background

User instructions

Version C: the top basket can be set in three different positions on both sides. The rack must be level on both sides.

To raise the basket lift it, pulling on the front edge (1), to the first or second catch depending on the height required. To lower it, pull the release lever (2).

This is also possible with the basket loaded, but in this case when lowering the basket it should be held steady with one hand to avoid knocking the dishes.

30

Image 31
Contents GUIDE FOR USING THE DISHWASHER AND THE WASHING PROGRAMS Contents NEVER BE REMOVED Safety instructions1. Safety and operating instructions USES OTHER THAN THOSE DESCRIBED ABOVETHIS DISHWASHER MUST BE USED BY ADULTS APPLIANCE AQUASTOP MODELS2. Installation and hook-up Installation instructions2.1 Water supply connection DRAIN CONNECTION CONNECTING TO THE WATER SUPPLYNEVER DISCONNECT THE PLUG BY PULLING ON THE POWER SUPPLY LEAD 2.2 Electrical connection and precautionsIF THE APPLIANCE IS PROVIDED WITH A PLUGLESS SUPPLY CORD FOR GREAT BRITAIN ONLY Fuse replacement3.1 Upper panel User instructions3. Description of the controls SELECTED PROGRAM INDICATOR LIGHTSHALF LOAD BUTTON 13 INFORMATION DISPLAY SETTING THE WASHING PROGRAM AND SWITCHING ON“3/1” OPTION BUTTON “3/1” OPTION LIGHTThe RAPID CYCLE 6, “3/1” 8, HALF LOAD WASH 10 and DELAYED START MINUTES POWERVery dirty pans DURATIONRAPID CYCLES available in all programs except the soak program 3.2 Washing programsBefore starting a washing program make sure that The correct amount of detergent has been added to the dispenseravailable in all programs except the soak program SELECTING HALF LOAD WASHDELAYED START available in all programs except the soak program TO CUT DOWN ON DETERGENT CONSUMPTION! … AND PROTECT THE ENVIRONMENT CANCELLING THE CURRENT PROGRAMCHANGING THE PROGRAM TO SAVE ON ENERGY! … AND PROTECT THE ENVIRONMENTREMOVING THE DISHES END OF CYCLE4.1 Using the water softening system 4. Operating instructionsADJUSTING THE WATER SOFTENING SYSTEM WATER HARDNESS TABLE 4.2 Using the rinse aid and detergent dispensersADDING THE RINSE AID ADJUSTING THE RINSE AID DISPENSER SETTINGDuring the washing cycle, the dispenser will be opened automatically ADDING THE DETERGENTUser instructions Correct loading of the dishes helps ensure optimal washing results 4.3 General warnings and recommendationsMAKE SURE that the items being washed are dishwasher-safe Dishes and objects in copper, tin, zinc or brass these tend to stain Items which are not dishwasher-safeLOWER BASKET 4.4 Using the basketsLOADING THE LOWER BASKET CUTLERY BASKET LOADING THE UPPER BASKET UPPER BASKETDepending on the models, the basket may be equipped with some or all of the following accessories Version B ADJUSTING THE UPPER BASKETUser instructions 5.1 General warnings and recommendations 5. Cleaning and maintenanceCLEANING THE WATER INTAKE FILTER CLEANING THE SPRAY ARMSFill the rinse aid dispenser Shut off the water supply tap CLEANING THE FILTER UNITGENERAL WARNINGS AND RECOMMENDATIONS FOR CORRECT MAINTENANCE PROLONGED DISUSEReconnect the water intake hose and open the tap again TROUBLESHOOTING MINOR PROBLEMSIf the dishes are not being cleaned properly, check that BEFORE STARTING THE DISHWASHER AFTER PROLONGED DISUSEIf the dishes show signs of streaking, staining, etc., check that If the dishes fail to dry or remain dull, check thatIf there are visible traces of rust inside the tank E1 E2 E3 E4 E5 E6 6. TroubleshootingFAULT Safety levelWater intake system malfunction E7 E8 E9Turbine flow-regulator malfunction Alternate washing system malfunctionHeight depending on models Capacity Water supply pressure TECHNICAL DATAElectrical characteristics Width