Smeg DD612S7 manual User instructions

Page 9

User instructions

"3/1" OPTION BUTTON (on some models only) (available in all programs except the soak program)

By pressing the button (4) you activate the "3/1" option, confirmed when the relative light comes on. This option has been studied for the use of dishwashing powder or tablets with integrated substances in place of regenerating salt or rinse-aid known on the market as “3 in 1” or “triple action” products; in this case the dishwasher will use the product in an optimal way avoiding salt and rinse-aid consumption, which could already be found in the dishwasher.

Note: When selecting the " 3/1" button, it is normal that the salt and rinse-aid lights remain on, if their containers are empty.

DELAY PROGRAM (on some models only) (available in all programs except the soak program)

The PROGRAM DELAY button (3) can be pressed to delay the start of the washing program by 3, 6 or 9 hours. This function allows you to set the dishwasher to work at your preferred time of day.

After selecting the delay, start the program (see relative section).

The appliance will prewash the dishes, after which the "program delay" set previously will come into effect (the light corresponding to 3, 6 or 9 hours flashes).

To reset or change the delay once the program has started:

￿press the START/PAUSE button (5) for a few seconds, until the PHASES/PROGRAM lights (10) come on;

￿press the DELAY PROGRAM button (3) several times “until the program delay” returns to zero (all the lights indicating the delay go out);

￿press the START/PAUSE button (5) to start the new program.

22

Image 9
Contents Guide for Using the Dishwasher and the Washing Programs Contents Phases /PROGRAM Lights Power on LightON/OFF Button Selection Programs Buttons P1...P5180 120 Programming LightingStart Program Selection ProgramEND Program Interruption of a ProgramTo Change a Program Annulling a Program User instructions User instructions Removing the Dishes To Save on ENERGY! … and Protect the EnvironmentWater Hardness Table Adjusting the Water Softening SystemCode Phases Lights Description TroubleshootingFor Cleaning Dishwashers Contents Safety instructions Safety instructions Aquastop Models Appliance Installation instructions Connecting to the Water Supply Water supply connectionDrain Connection If the Appliance is Provided with a Plugless Supply Cord Electrical connection and precautionsFor Great Britain only When Cleaning and Maintaining the ApplianceUser instructions Using the water softening systemUsing the rinse aid and detergent dispensers Adding the Rinse AID Adjusting the Rinse AID Dispenser SettingAdding the Detergent Products General warnings and recommendations User instructions EN 50242 Standard Loads for Certification Bodies Using the basketsLoading the Lower Basket Lower BasketCutlery Basket Upper Basket Loading the Upper Basket Pull-out version Adjusting the Upper BasketCleaning the Spray Arms Cleaning the Water Intake FilterProlonged Disuse Cleaning the Filter UnitBefore Starting the Dishwasher After Prolonged Disuse If the dishes fail to dry or remain dull, check that 135 145