Smeg DD612S7 manual Troubleshooting, Code Phases Lights Description

User instructions

2. Troubleshooting

In case of a malfunction, the dishwasher will identify the program by switching on a combination of lights.

When an alrm is present, all the PROGRAM lights (7) come on, while the PHASES/PROGRAM lights (10) identify the error code:

CODE	PHASES LIGHTS		DESCRIPTION
E1		The	anti-flooding system (if installed) has been
		tripped.
E2		The system which limits the water level inside the
		dishwasher (safety unit) has been tripped.
E3		The appliance cannot heat the water.
E4		Temperature sensor disconnected.
E5		The appliance is not able to take in water.
E6		The appliance is not able to pump out the water
		from the tank.
		The appliance is not able to measure the amount
E7		of water loaded accurately (on models with turbine
		flow-regulator only).
E8		Anomaly in the system which distributes water to
		the basket (where installed).
		The maximum level of water for loading has been
E9		exceeded (on models with turbine flow-regulator
		only).

26