Smeg DD612S7 manual Selection Program, Start Program

Page 6

User instructions

SELECTION PROGRAM

The program selection is possible through the relative buttons (2).

When the button relating to the program required is pressed, the relative light will come on to confirm the operation.

START PROGRAM

To start the dishwasher, press the START/PAUSE button (5) for a few seconds, until the light of the first phase of the selected program starts to flash (confirmation beep).

This phase, that updates itself during the cycle, is “indicative” since it is influenced by the washing conditions such as dishwasher type and quantity, entry temperature etc. For this reason it is normal to see the updating during a program (increment and decrease of minutes) specially in the passage from one phase to the other (for example, from washing to rinse).

As the program runs, the PHASES/PROGRAM lights (10) will indicate the current cycle status.

Prewash

Wash

 

 

 

The light of the phase in progress will

 

 

 

flash, while the lights of the previous and

Rinse

 

subsequent phases remain on.

 

 

Dry

N.B. during execution of programs which

 

 

 

 

 

 

 

 

 

do not include a prewash, the first

 

 

 

PHASES/PROGRAM light (10) will remain

 

 

 

off.

19

Image 6
Contents Guide for Using the Dishwasher and the Washing Programs Contents ON/OFF Button Power on LightPhases /PROGRAM Lights Selection Programs Buttons P1...P5180 120 Lighting ProgrammingSelection Program Start ProgramEND Program Interruption of a ProgramTo Change a Program Annulling a Program User instructions User instructions To Save on ENERGY! … and Protect the Environment Removing the DishesAdjusting the Water Softening System Water Hardness TableTroubleshooting Code Phases Lights DescriptionFor Cleaning Dishwashers Contents Safety instructions Safety instructions Aquastop Models Appliance Installation instructions Connecting to the Water Supply Water supply connectionDrain Connection Electrical connection and precautions If the Appliance is Provided with a Plugless Supply CordWhen Cleaning and Maintaining the Appliance For Great Britain onlyUsing the water softening system User instructionsUsing the rinse aid and detergent dispensers Adjusting the Rinse AID Dispenser Setting Adding the Rinse AIDAdding the Detergent Products General warnings and recommendations User instructions Using the baskets EN 50242 Standard Loads for Certification BodiesLower Basket Loading the Lower BasketCutlery Basket Upper Basket Loading the Upper Basket Adjusting the Upper Basket Pull-out versionCleaning the Water Intake Filter Cleaning the Spray ArmsCleaning the Filter Unit Prolonged DisuseBefore Starting the Dishwasher After Prolonged Disuse If the dishes fail to dry or remain dull, check that 135 145