Smeg BL1S, BL2S instruction manual Operating instructions, Using the water softening system

Page 13

User instructions

4. Operating instructions

Once the dishwasher has been correctly installed, prepare for use as follows:

• Adjust the water softening system;

• Add the regenerating salt;

• Add the rinse aid and detergent.

4.1 Using the water softening system

The amount of scale contained in the water (water hardness

 

index) can cause whitish staining on the dry dishes, which

 

tend to become dull over time. The dishwasher is equipped

 

with an automatic softening system which uses a special

 

regenerating salt to reduce the hardness of the water.

 

The dishwasher is factory set for water hardness level 3

SALT

(average hardness 41-60°dF– 24-31°dH).

 

When using water of medium hardness, the regenerating salt container should be refilled after approximately 20 washing cycles. The salt container can hold approximately 1.7 Kg of salt in grains. Some models are equipped with an optical no-salt indicator. In these models, the cap of the salt container contains a green float which descends as the salt concentration in the water drops. When the green float can no longer be seen through the transparent cap, the container must be topped up with regenerating salt. The container is situated at the bottom of the dishwasher. After removing the lower basket, unscrew the salt container cap by turning it anticlockwise and pour in the salt using the funnel supplied with the dishwasher. Before replacing the cap, remove any salt residues from around the opening.

•When using the dishwasher for the first time, in addition to the salt it is also necessary to add one litre of water to the container.

•Each time the salt container is refilled, make sure that the cap is securely closed. The mixture of water and detergent must never penetrate the salt container, as this would compromise the operation of the regeneration system. In the event of this occurring, the warranty will be invalidated.

•Only use regenerating salt specially formulated for domestic dishwashers. If using salt tablets, do not fill the container completely.

•Do not use table salt as it contains insoluble substances which, over time, may damage the water softening system.

•When necessary, refill the regenerating salt container before starting the washing program. In this way, the excess saline solution will be immediately removed by the water; the prolonged presence of salt water inside the tank may lead to corrosion.

Be careful not to confuse the salt and detergent packages; adding detergent to the salt container will damage the water softening system.

ADJUSTING THE WATER SOFTENING SYSTEM

The dishwasher is equipped with an electronic device for adjusting the water softening setting according to the hardness of the water.

Depending on model, the setting may be made electronically or by means of a selector switch.

34

Page 12 Page 14
Image 13
Page 12 Page 14
Contents Dishwasher Contents Safety and operating instructions Safety instructionsAquastop Models Connecting to the Water Supply Installation and hook-upWater supply connection Drain Connection Electrical connectionUpper panel Description of the controlsInformation display Delaying the Program Switching OFFAnnulling the Program in Progress Modifying the ProgramTable of Programs HALF-LOAD Function certain models only Washing programsSliding Facing Panel for fully integrated models only Removing the DishesMoving the Facing Panel Adjusting the Water Softening System Using the water softening systemOperating instructions Setting Water Hardness Regeneration Electronic SettingSwitch Setting Performed every cycleWater Hardness Table Setting Using the rinse aid and detergent dispensersAdjusting the Rinse AID Dispenser Setting Adding the Rinse AIDAdding the Detergent User instructions General warnings and recommendations Lower Basket Using the basketsLoading the Lower Basket Loading examplesKnife blades do not protrude from the basket Cutlery BasketUpper Basket Loading the Upper BasketPull-out version Adjusting the Upper BasketPush-button version Cleaning the Water Intake Filter Cleaning and maintenanceCleaning the Spray Arms Cleaning the Orbital Version Spray ARMProlonged Disuse Cleaning the Filter UnitTroubleshooting Minor Problems Fault Troubleshooting598 Vorrichtung für die Einstellung der Spannung der Türfedem

BL2S, BL1, BL2, BL1S specifications

Smeg, renowned for its stylish kitchen appliances, has introduced a line of innovative blenders: the Smeg BL1S, BL2, BL1, and BL2S. These models are designed to combine aesthetics with functionality, offering consumers a blend of performance and design.

The Smeg BL1S is a standout with its retro design that pays homage to the brand's iconic 1950s style. It features a powerful 800-watt motor, enabling the user to effortlessly blend a variety of ingredients. One of its main features is the stainless steel blade, which ensures consistent results, whether making smoothies, soups, or sauces. The BL1S also includes an easy-to-read LED display, allowing for precise control over blending times and speeds.

Next in line, the Smeg BL2 brings a slightly different design while maintaining the same powerful performance. It boasts a 1,000-watt motor, making it suitable for tougher tasks such as crushing ice or blending dense ingredients. Its dual speed settings and pulse function provide versatility, allowing users to achieve the desired texture with ease. The BL2 also has a 1.5-liter Tritan jug, which is resistant to scratches and impacts, ensuring durability over time.

The Smeg BL1 is another impressive model that captures attention with its unique design and robust features. This blender is equipped with a 900-watt motor and features the same high-quality stainless steel blade found in the other models. The BL1 offers three different speed settings plus a pulse option, making it adaptable for various culinary tasks. Notably, it features a safety lock, ensuring that it cannot operate unless the jar is securely in place, enhancing user safety.

Lastly, the Smeg BL2S combines sleek aesthetics with advanced technology. This model incorporates a smart technology feature that detects the contents' density and adjusts the blending speed automatically for optimal results. The BL2S also offers a noise-reducing design, minimizing disturbance while blending. Additionally, it features a detachable blade system, making cleaning a breeze.

Overall, the Smeg BL1S, BL2, BL1, and BL2S blenders encapsulate the brand's commitment to quality, style, and innovation. With their powerful motors, durable materials, and user-friendly features, these blenders are essential tools for both culinary enthusiasts and casual users alike, making blending tasks more efficient and enjoyable.
Top Page Image Contents