Smeg BL1S, BL2S instruction manual General warnings and recommendations

Page 18

User instructions

4.3General warnings and recommendations

Before using the dishwasher for the first time, it is advisable to read the following recommendations concerning dish types to be washed and their loading.

There are generally no constraints on the washing of domestic dishes, but in certain cases it is necessary to take their characteristics into account.

Before loading the dishes into the baskets it is necessary to:

•remove coarse food remains: e.g. bones, fish-bones, etc. which may clog the filter or damage the wash pump.

•soak any pots or pans with burnt-on food remains on the bottom to facilitate removal, then load them into the LOWER BASKET.

If a small quantity of dishes has to be washed, use the “½ load wash” option; this saves electricity and water.

Remember to load the upper basket only; the lower basket must be left empty.

There is no need to pre-wash the dishes under running water before loading them into the baskets since this only wastes water.

Correct loading of the dishes helps ensure optimal washing results.

WARNING!

•Make sure that the dishes are securely in place so that they cannot tip over or obstruct the rotation of the spray arms during the washing cycle.

•Do not place very small objects in the baskets as these could fall and obstruct the spray arms or the wash pump.

•Containers such as cups, bowls, glasses and pots should always be loaded with the opening facing downwards and with any cavities at an angle, to allow the water to drain out.

•Do not stack dishes or place them in such a way that they cover one other.

•Do not place glasses too close together because they may knock against each other and break, or there might be staining at the point where they touch.

MAKE SURE that the items being washed are dishwasher-safe.

Items which are not dishwasher-safe:

•Wooden dishes, pots or pans: these may be damaged by the high washing temperatures.

•Handcrafted items: these are rarely suitable for washing in a dishwasher. The relatively high water temperatures and the detergents used may damage them.

•Plastic dishes: these are not heat resistant and may lose their shape. Heat resistant plastic dishes must be washed in the upper basket.

•Dishes and objects in copper, tin, zinc or brass: these tend to stain.

•Aluminium dishes: items made from anodised aluminium may lose their colour.

•Silverware: silver items may stain.

•Glass and crystal: in general, glass and crystal objects can be washed in the dishwasher. However, certain types of glass and crystal may become dull and lose their clearness after many washings. Therefore, for these items we recommend using the least aggressive program available.

•Decorated items: the decorated objects available on the market are generally able to withstand washing in the dishwasher, although the colours may fade after a great many washes. If in doubt as to the fastness of the colours, it is advisable to wash just a few items at a time for approximately one month.

39

Page 17 Page 19
Image 18
Page 17 Page 19
Contents Dishwasher Contents Safety instructions Safety and operating instructionsAquastop Models Installation and hook-up Connecting to the Water SupplyWater supply connection Electrical connection Drain ConnectionDescription of the controls Upper panelInformation display Annulling the Program in Progress Switching OFFDelaying the Program Modifying the ProgramTable of Programs Washing programs HALF-LOAD Function certain models onlyRemoving the Dishes Sliding Facing Panel for fully integrated models onlyMoving the Facing Panel Using the water softening system Adjusting the Water Softening SystemOperating instructions Switch Setting Electronic SettingSetting Water Hardness Regeneration Performed every cycleAdjusting the Rinse AID Dispenser Setting Using the rinse aid and detergent dispensersWater Hardness Table Setting Adding the Rinse AIDAdding the Detergent User instructions General warnings and recommendations Loading the Lower Basket Using the basketsLower Basket Loading examplesUpper Basket Cutlery BasketKnife blades do not protrude from the basket Loading the Upper BasketAdjusting the Upper Basket Pull-out versionPush-button version Cleaning the Spray Arms Cleaning and maintenanceCleaning the Water Intake Filter Cleaning the Orbital Version Spray ARMCleaning the Filter Unit Prolonged DisuseTroubleshooting Minor Problems Troubleshooting Fault598 Vorrichtung für die Einstellung der Spannung der Türfedem

BL2S, BL1, BL2, BL1S specifications

Smeg, renowned for its stylish kitchen appliances, has introduced a line of innovative blenders: the Smeg BL1S, BL2, BL1, and BL2S. These models are designed to combine aesthetics with functionality, offering consumers a blend of performance and design.

The Smeg BL1S is a standout with its retro design that pays homage to the brand's iconic 1950s style. It features a powerful 800-watt motor, enabling the user to effortlessly blend a variety of ingredients. One of its main features is the stainless steel blade, which ensures consistent results, whether making smoothies, soups, or sauces. The BL1S also includes an easy-to-read LED display, allowing for precise control over blending times and speeds.

Next in line, the Smeg BL2 brings a slightly different design while maintaining the same powerful performance. It boasts a 1,000-watt motor, making it suitable for tougher tasks such as crushing ice or blending dense ingredients. Its dual speed settings and pulse function provide versatility, allowing users to achieve the desired texture with ease. The BL2 also has a 1.5-liter Tritan jug, which is resistant to scratches and impacts, ensuring durability over time.

The Smeg BL1 is another impressive model that captures attention with its unique design and robust features. This blender is equipped with a 900-watt motor and features the same high-quality stainless steel blade found in the other models. The BL1 offers three different speed settings plus a pulse option, making it adaptable for various culinary tasks. Notably, it features a safety lock, ensuring that it cannot operate unless the jar is securely in place, enhancing user safety.

Lastly, the Smeg BL2S combines sleek aesthetics with advanced technology. This model incorporates a smart technology feature that detects the contents' density and adjusts the blending speed automatically for optimal results. The BL2S also offers a noise-reducing design, minimizing disturbance while blending. Additionally, it features a detachable blade system, making cleaning a breeze.

Overall, the Smeg BL1S, BL2, BL1, and BL2S blenders encapsulate the brand's commitment to quality, style, and innovation. With their powerful motors, durable materials, and user-friendly features, these blenders are essential tools for both culinary enthusiasts and casual users alike, making blending tasks more efficient and enjoyable.
Top Page Image Contents