JVC LPT0762-001B 38 EN, When programmes overlap each other, Confirm the overlapping programmes

38 EN	OPERATIONS ON S-VHS DECK (cont.)
	When programmes overlap each other
	If “PROGRAM OVERLAPPED” appears, you have another
	programme overlapping the programme you have just made.
	The Programme Check screen appears and conflicting
	programmes will start blinking.
		PR START		STOP	CH	DATE
	PROGRAM OVERLAPPED	1	8:00	10:00	3	24.04
		2	10:00	10:45	2	25.04
		3	11:30	13:00	1	25.04
		4	9:00	10:00	92	DAILY
		5
		6
		7
		8
		[	/ ]	[PROG] : EXIT

Example: Programme 1 (you have just made) and

Programme 4 overlap each other.

A Confirm the overlapping programmes.

Overlapping programmes blink on the TV screen.

B Select the programme to modify.

Press rt, then press OK or e.

● You can only select one of the overlapping programmes.

NOTE:

If you do not mind this overlap, press PROG to finish the timer programme setting. The programme with the lower programme number will be recorded and the other one will not be recorded correctly. If no changes are made for approximately 1 minute, the unit will return to the normal screen.

C Cancel or change programme setting.

To cancel a programme, press & when the Programme screen you do not want is shown. “PROGRAM COMPLETED” appears on the TV screen for about 5 seconds, then the normal screen appears.

To change a programme, press the appropriate button: START +/–,STOP +/–,DATE +/–,PR +/–,DAILY (number key “8”), WEEKLY (number key “9”) and/or SP/ LP/EP (p) when the Programme screen on which you want to make changes is shown, then press OK. “PROGRAM COMPLETED” appears on the TV screen for about 5 seconds, then the normal screen appears.

NOTE:

If the overlap is not yet solved, or another overlap occurs with the timer programme setting after making the last correction on a programme, the conflicting programmes will be shown on the Programme Check screen again. Repeat the above steps again until the overlap is solved.