Masterpage:Right-No-Heading
EN 81
Filename [XVS20AG_10Subsidiary.fm]
Page 81 April 9, 2003 6:20 pm
Picture Settings * The default setting is bold in the table below.
Audio Settings * The default setting is bold in the table below.
8SCREEN SAVER
ON
OFF
The TV screen may be burned out if a static picture is displayed for a
long time. When this function is set to “ON”, the unit automatically
activates the screen saver function if a static picture, such as an on-
screen display or menu is displayed for over 5 minutes.
NOTE:
This function is not available for Audio CDs and MP3 discs.
8MP3/JPEG
MP3
JPEG
You can select files to play, when both MP3 files and JPEG files are
recorded on a disc.
MP3: Select this to play back MP3 files.
JPEG: Select this to play back JPEG files.
8DIGITAL AUDIO OUTPUT
PCM ONLY
DOLBY DIGITAL/PCM
STREAM/PCM
Set to the appropriate mode according to the type of the device connected to
DIGITAL AUDIO OUT connector on the rear of unit.
It is not necessary to set this mode when you connect no device to DIGITAL
AUDIO OUTconnector.
PCM ONLY:
Select this when you connect the unit’s DIGITAL AUDIO OUT
connector to the linear PCM digital input connector of other audio
device.
DOLBY DIGITAL/PCM:
Select this when you connect the unit’s DIGITAL AUDIO OUT
connector to the digital input connector of a Dolby Digital decoder
or an amplifier with a built-in Dolby Digital decoder.
STREAM/PCM:
Select this when you connect the unit’s DIGITAL AUDIO OUT
connector to the digital input connector of an amplifier with a built-
in DTS, Dolby Digital, or MPEG multichannel decoder.
8ANALOG DOWN MIX
DOLBY SURROUND
STEREO
Set to the appropriate mode according to your audio system when you play
back a DVD VIDEO disc recorded with surround multichannel audio. This
setting affects only the analogue audio output signal from the AUDIO OUT
connectors (DVD) when playing back a DVD VIDEO disc recorded with
surround multichannel audio.
DOLBY SURROUND:
Select this when you enjoy multichannel surround audio by
connecting the unit’s analogue AUDIO OUT connector (DVD)
to a surround decoder or an internal amplifier.
STEREO: Select this when you enjoy conventional 2-channel stereo
audio by connecting the unit’s analogue AUDIO OUT
connectors (DVD) to a stereo amplifier/receiver or TV, or when
you dub audio of a DVD VIDEO disc recorded with surround
audio to your MD, cassette, etc.
NOTE:
The “ANALOG DOWN MIX” function does not work when the 3D Phonic function is
activated. (墌pg. 46)
XVS20AG_10Subsidiary.fm Page 81 Wednesday, April 9, 2003 6:20 PM