JVC HR-XVS20AA Enter the channel position, Press PR +, To Timer-Record Weekly Or Daily Serials

EN 35

G Enter the channel position.

Press PR +/–.			– P1 –
		START		STOP
		21:00		22:00
					SP
		DATE		TV PROG
		25.12			1
	[+/–]
	[PROG] : EXIT

H Set the tape speed.

Press SP/LP/EP (p).

●Select the appropriate colour system with “PAL/MESECAM” and “NTSC”. ( pg. 77, 78)

I Return to the normal screen.

Press PROG or OK. “PROGRAM COMPLETED” appears on the TV screen for about 5 seconds, then the normal screen appears. If “PROGRAM OVERLAPPED” appears on the TV screen, see page 38.

●Repeat steps B – I for each additional programme.

J Engage the unit’s timer mode.

Press # (TIMER). The unit turns off automatically and “#” appears on the front display panel.

●To disengage the timer mode, press # (TIMER) again.

To Timer-Record Weekly Or Daily Serials:

—anytime during steps D through H, press WEEKLY (number key “9”) for weekly serials or DAILY (number key “8”) for daily serials (Monday – Friday). Either “WEEKLY” or “DAILY” appears on the TV screen. Pressing the button again makes the corresponding indication disappear.

NOTE:

You can programme this unit to timer-record as many as 8 programmes. If you try to programme the unit to record a ninth, “PROGRAM FULL” appears on the TV screen. To record the extra programme, you must first cancel any unnecessary programmes. ( pg. 37)

Satellite Receiver Users

To timer-record a satellite broadcast using Express Timer Programming:

APerform steps A – J. Enter “L-1” for the channel position in step G.

BSet the satellite receiver to the appropriate channel before the selected programme begins.

CLeave the satellite receiver’s power on.