Sylvania DVC800CC Hints for Timer, To Stop AN Automatic Timer PRO, Gram Already Started

4) Set the start time	ONE TIME PROGRAM
	PROGRAM NUMBER		4
	DATE	05 /13 MON
First, press the PLAY button or the STOP	START TIME	- - : - -	- -
	END TIME	- - : - -	- -
button for the hour. Then, press the	CHANNEL	- -
	REC SPEED	- -

F.FWD button. Next, press the PLAY

button or the STOP button for the minute. Then, press the F.FWD button. And then, press the PLAY button or the STOP button for AM or PM. Then, press the F.FWD button.

¡If a tape is not in the DVD/VCR or does not have a safety tab, the TIMER SET light flashes and timer recording will not operate. Please insert a recordable tape.

¡When all timer recordings are finished, the TIMER SET light will flash. To use the DVD/VCR again as usual, press the TIMER SET button to disable the flashing TIMER SET light, then press the VCR/TV button to select the VCR position. The VCR/TV light will appear. Press the VCR button to choose VCR or

5) Set the end time

Follow the same instructions as "Set the start time" to set

the end time.

6) Set the channel number

Press the PLAY button or the STOP button repeatedly for the desired channel number. Then, press the F.FWD button.

ONE TIME PROGRAM

PROGRAM NUMBER 4
DATE		05 /13 MON
START TIME		07: 30	PM
END	TIME	- - : - -	- -
CHANNEL		- -
REC SPEED		- -
ONE TIME PROGRAM
PROGRAM NUMBER			4
DATE		05 /13 MON
START TIME		07: 30	PM
END	TIME	08: 30	PM
CHANNEL		- -
REC SPEED		- -

DVD mode, then continue with the other features as described in this manual.

¡When timer recordings are set, the TIMER SET light will come on. To use the DVD/VCR as usual until the time for the recording, press the TIMER SET button so that the TIMER SET light disappears. Press the VCR/TV button to choose the VCR position. The VCR/TV light will come on. Press the VCR button to choose VCR or DVD modes, then continue with the other features as described in this manual.

	If you connected the DVD/VCR to a cable box or satellite box					If you want to use the DVD player during
	as in "DVD/VCR TO TV CONNECTION" on page 14, set the					a VCR timer recording or while the TIMER
	DVD/VCR to channel 3 or 4 i.e. the same channel as the CH3					SET light is on or flashes.
	or CH4 switch on the back of the DVD/VCR. Then, select the
						¡You can use the DVD player while the TIMER SET
	channel you want to record with the cable box or satellite box.
	Leave the cable box or satellite box on for timer recording.					light is on or flashes, or during a timer recording. Press
						the POWER button to turn on the DVD/VCR. Press
						the VCR/TV button to choose VCR position. Press the
	7) Set the tape speed	ONE TIME PROGRAM
		DATE	05 /13 MON			DVD button on the remote control to choose DVD
	Press the PLAY button or the STOP	PROGRAM NUMBER 4				mode, then continue with the other DVD features as
		END TIME	08: 30		PM
		START TIME	07: 30		PM
	button repeatedly for the desired tape	CHANNEL	16			described in this manual. You don’t have to set the
		REC SPEED	SP
	speed. Then, press the F.FWD button.		SP			TIMER off to use the DVD.
			SLP
	5 To set another program, repeat step [4]. To exit					TO STOP AN AUTOMATIC TIMER PRO-
						GRAM ALREADY STARTED
	from the set up screen, press the
	CLEAR/C.RESET button (You only exit from the					Press the STOP/EJECT or the TIMER SET button on
	set up screen. the information you entered for					the DVD /VCR.
	the timer recording will not be cleared).					TO CHECK, CORRECT, OR CANCEL AN
	6 When you finish programming, press the					AUTOMATIC TIMER PROGRAM
	TIMER SET button to activate the timer.
						1 Turn the power on by pressing the POWER
¡As the TIMER SET light		comes on	the		VCR
							button. (If the DVD/VCR is in TIMER STAND-
	becomes STANDBY status, and switches to DVD
							BY status, press the TIMER SET button
	OUTPUT mode automatically.
							instead of the POWER button.)
¡When DVD sits idle for more than thirty-five min-
	utes, the DVD power will be turned off automatical-					2 Select main menu by pressing the MENU
	ly. If you press the TIMER SET button under such						button.
	condition, the DVD/VCR power will be turned off
						3 Select "TIMER PROGRAMMING" by press-
	and become STANDBY status.
							ing the PLAY or the STOP button. Then,
TO CLEAR A PROGRAM
							press the F.FWD button.
Follow the steps from 2 to 3. Select the program num-
ber you want to clear, and then press the REW button.						4 Select the program number which you want
							to check by pressing the PLAY or the STOP
	HINTS FOR TIMER
							button.
	RECORDING					¡The details of the selected program appears on the
						TV screen.
				VCR
						¡Go to the digit you want to change by pressing the
¡If there is a power failure or the DVD/VCR is						F.FWD or the REW button. Then, enter correct num-
	unplugged for more than 30 seconds, the clock set-					bers by pressing the PLAY or the STOP button.
	ting and all timer settings will be lost.					¡You may cancel the entire program by pressing the
¡If a tape ends during TIMER RECORDING, the						REW button while the program number flashes.
	VCR will stop, eject the tape, and switch to the DVD
						5 Press the CLEAR/C.RESET button to exit.
	mode automatically as the TIMER SET light blinks.
	(If the DVD power is off,	the DVD/VCR			will
						6	Press the TIMER SET button to return to
	become STANDBY status).
							timer stand-by mode.
					– 21 –		EN

1L25