82 EN

 

 

SUBSIDIARY SETTINGS (cont.)

 

 

 

 

 

8 D. RANGE COMPRESSION

You can compress the dynamic range (the difference between the loudest and

AUTO

quietest audio signals) of the sound when listening to the sound at a low

ON

volume or at night.

 

 

 

This function is available with DVD VIDEO discs recorded with the Dolby

 

 

Digital format. Set to the appropriate mode according to the number of

 

 

channels recorded.

 

 

 

AUTO:

Audio is played back with channels other than Dolby Digital

 

 

ON:

channel 1 or 2 compressed.

 

 

 

Audio is played back with all channel compressed.

 

 

NOTES:

 

 

 

 

 

 

It is recommended to set to “ON” when you enjoy surround sound at night.

 

 

The “D. RNAGE COMPRESSION” function works only when playing back a disc

 

 

recorded with Dolby Digital format. The setting is not effective for other discs.

 

 

The “D. RNAGE COMPRESSION” function does not work when the 3D Phonic function

 

 

is activated. ( pg. 46)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Playback discs

 

 

 

Output

 

 

 

 

 

 

 

 

STREAM/PCM

 

DOLBY DIGITAL/PCM

 

PCM ONLY

 

 

 

 

 

 

 

 

 

 

 

DVD VIDEO with

 

 

 

 

 

 

48/44.1 kHz, 16/20/24 bit

 

 

48/44.1 kHz, 16/20/24 bit linear PCM

 

linear PCM

 

 

 

 

 

 

 

 

 

 

 

 

 

DVD VIDEO with

 

 

 

No output

 

96/88.2 kHz linear PCM

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

DVD VIDEO with DTS

 

DTS bitstream

 

48 kHz, 16 bit stereo linear PCM

 

 

 

 

 

 

 

DVD VIDEO with Dolby

 

Dolby Digital bitstream

 

48 kHz, 16 bit stereo linear

Digital

 

 

PCM

 

 

 

 

 

 

 

 

 

 

 

Audio CD/Video CD

 

 

44.1 kHz, 16 bit stereo linear PCM

 

 

 

 

 

 

 

Audio CD with DTS

 

 

 

DTS bitstream

 

 

 

 

 

 

 

 

NOTES:

The unit is not equipped with the DTS decoding function.

When you play back a DVD VIDEO or Audio CD disc with DTS, use a DTS decoder to get correct signals from your speakers. Never use the unit’s analog output connectors, which output incorrect signals that may damage your speakers.

If you connect the analog outputs and digital outputs simultaneously, be sure to select the source of the amplifier correctly, or set the level control of the amplifier connected to the analog outputs to minimum.

Others Settings

* The default setting is bold in the table below.

8 RESUME

When this function is set to “ON”, you can use the resume function.

ON

( pg. 43)

 

OFF

ON:

You can start playback from the resume point if it is

 

OFF:

memorized.

 

You cannot use the resume function.

 

NOTE:

 

This function is not available for Audio CDs and MP3 discs.

 

 

8 ON SCREEN GUIDE

When this function is set to “ON”, the unit can display “on-screen

ON

guide” icons or characters which shows the conditions of the unit or

OFF

disc.

Page 82
Image 82
JVC LPT0762-001B, HR-XVS20AA manual 82 EN, Others Settings