JVC LPT0762-001B, HR-XVS20AA manual Express Timer Programming, 34 EN

34 EN OPERATIONS ON S-VHS DECK (cont.)

Express Timer

Programming

If you do not know the G-CODEnumber for the programme you wish to record, use the following procedure to set your unit to timer-record the programme.

Before performing Express Timer Programming:

●Make sure that the unit’s built-in clock is set properly.

●Insert a cassette with the safety tab in place. The unit will come on automatically.

●Turn on the TV and select the video channel (or AV mode).

●Slide the TV/S-VHS/DVDswitch to the right.

Example: To timer-record the programme from 21:00 to 22:00 on 25th December, on channel 1.

A Select the S-VHS deck.

On the unit

Press S-VHS/DVDrepeatedly so that the S-VHS indicator lights up.

On the remote control

Press S-VHSso that the S-VHS indicator lights up.

B Access the G-CODE/SHOWVIEWscreen.

Press PROG.

C Access the Programme screen.

Press START +/–. (If you’re just starting out, “P1” appears.)

		– P1 –
	START		STOP
	– –:– –		– –:– –
				SP
	DATE		TV PROG
	– –.– –			– –
[+/–]
[PROG] : EXIT

D Enter the programme start time.

Press START +/– to enter the time you want recording to start.

●Press and hold START +/– to move in 30-minute increments, or press and release repeatedly to move 1 minute at a time.

		– P1 –
	START		STOP
	21:00		– –:– –
				SP
	DATE		TV PROG
	– –.– –			– –
[+/–]
[PROG] : EXIT

E Enter the programme stop time.

Press STOP +/– to enter the time you want recording to stop.

●Press and hold STOP +/– to move in 30-minute increments, or press and release repeatedly to move 1 minute at a time.

F Enter the programme date.

Press DATE +/–.

●The current date appears on the TV screen. The date you enter appears in its place.